Loading... Please wait...

Categories

Our Newsletter

Enter Your email address to
subscribe our newsletter.

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

Bilstein 6112 Assembled + 5160 Rear Shocks Kit - 10-16 Toyota 4Runner

Sorry but this item is currently unavailable.

Please check back at a later stage.

$1,299.95 $1,199.95
(You save $100.00)
Shipping:
Calculated at checkout
* Rear ride height:
* Drive Option:
Quantity:

Product Description

Both struts and coil springs come pre-assembled out of the box, with new top strut mounting hardware. This saves time and money on labor cost. These units are set at the top height setting. These struts are assembled at the highest setting for the driver side, and 1 setting below the highest on passenger side, this is to account for the slight lean these models come with from the factory. This specific setup is intended for 4WD models, if you install these parts on a 2WD 4Runner, it will lift the front end far too much - please communicate with us prior to your purchase if you have a 2WD 4Runner so we can provide a different assembly for you.

  • (2) 6112 Assembled out of the box, at the highest height setting (2.5" of lift), part 47-259768
  • (2) Bilstein 5160 Rear Reservoir Shocks 25-227611, with clamps and hardware
  • Large 60mm monotube for increased oil capacity, cooling, and long-term durability
  • 60mm digressive piston for improved ride comfort and control over rough terrain
  • Custom engineered cold wound linear springs for enhanced vehicle control
  • Monotube design for consistent, fade-free performance
  • Application specific for maximum performance
  • Reuses OEM top mount and rubber isolator
  • Made in the USA
  • Kit includes (2) front 60mm shocks, (2) spring seats and (2) springs

BILSTEIN 6112 Series 

Designed for the serious off-road adventure seeker, the all-new BILSTEIN 6112 Series is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit features an adjustable spring seat which allows vehicle leveling, larger tires, and increased ground clearance. Kit includes (2) front 60mm shocks, (2) spring seats and (2) springs.

 

Product Videos

BILSTEIN 6112 Series - Product Spotlight (01:02)
http://www.bilsteinUS.com - Designed for the serious off-road adventure seeker, the all-new BILSTEIN 6112 Series is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit features an adjustable spring seat which allows vehicle leveling, larger tires, and increased ground clearance. Kit includes (2) front 60mm shocks, (2) spring seats and (2) springs. Features and Benefits: - Large 60mm monotube for increased oil capacity, cooling, and long-term durability - 60mm digressive piston for improved ride comfort and control over rough terrain - Custom engineered cold wound linear springs for enhanced vehicle control - Monotube design for consistent, fade-free performance - Application specific for maximum performance - Reuses OEM top mount and rubber isolator - Made in the USA - Kit includes (2) front 60mm shocks, (2) spring seats and (2) springs
  • BILSTEIN 6112 Series - Product Spotlight
    http://www.bilsteinUS.com - Designed for the serious off-road ...

Warranty Information

Bilstein warrants to the original retail purchaser that, for a period of ninety (90) days from the date of purchase, this product shall be free from defects in material and workmanship. Any implied warranty of merchantability, fitness or fitness for particular purpose, except as may be prohibited by applicable law, is likewise limited in duration to ninety (90) days from the date of original retail purchase. Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you.

This warranty is non-transferable and does not cover normal wear and tear or any other loss, liability or damage resulting from improper alteration, disassembly, handling, installation, service, repair or use of this product. Should this product fail as a result of a defect in materials or workmanship within the warranty period, contact Bilstein's Warranty Service Department by telephone at 1(800) 370-9522, or in writing at ThyssenKrupp Bilstein of America 14102 Stowe Drive, Poway, California, 92064, for repair or replacement at Manufacturer's option. Do not return this motorsports product to the place of purchase. Proof of purchase is required to process warranty.

Find Similar Products by Tag

bilstein  offroad  tacoma