{"title":"Suspension Control Arm Kit","description":null,"products":[{"product_id":"camburg-ford-f-150-2wd-4wd-04-08-1-25-performance-uniball-upper-arms","title":"Camburg Ford F-150 2wd\/4wd '04-08 1.25\" Performance Uniball Upper Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156\" wall round tubing Laser cut and CNC bent tubes MIG welded CAD\/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.25\" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3\" of lift. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818526584881,"sku":"CBG110078","price":979.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110078.jpg?v=1763165381"},{"product_id":"camburg-ford-raptor-10-14-1-25-performance-uniball-upper-arms","title":"Camburg Ford Raptor '10-14 1.25\" Performance Uniball Upper Arms","description":"Our 1.25\" uniball upper arms for '10-14 Ford Raptors offer technical improvements while keeping costs down. They use polyurethane bushings instead of heims, allowing for less maintenance. The smaller uniball allows for the use of factory offset wheels and tires. By replacing the stock ball-joint with a larger 1.25\" uni-ball bearing, we increase wheel travel and durability under extreme conditions. Our arms also improve alignment, driving characteristics, and handling. Manufactured in-house, they are made from 4130 chromoly and feature laser-cut and CNC-bent tubes, MIG welding, and a steel gray powder-coating. Polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25\" PTFE-lined uniballs are included. All necessary hardware is provided, and the arms are designed for 1-3\" of lift. When using the factory OEM 17\" wheel, a 1\/4\" wheel spacer may be needed for larger tires. Made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818526978097,"sku":"CBG110109","price":1079.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110109.jpg?v=1763165382"},{"product_id":"camburg-ford-raptor-17-18-1-25-performance-uniball-upper-arms","title":"Camburg Ford Raptor '17-18 1.25\" Performance Uniball Upper Arms","description":"For the '17-18 Ford Raptors we offer our 1.25\" uniball upper arms that use polyurethane bushings. You're able to use the factory offset wheels and tires. When running larger 37\" tires you want to use a zero offset wheel. These do NOT work on the 2019+ models that have a position sensor incorporated into the new FOX electronic suspension unless you have the damper interface module installed to disable. When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint with a uni-ball bearing we're able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818527109169,"sku":"CBG110134","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110134.jpg?v=1763165381"},{"product_id":"1-25-performance-uniball-upper-arms-w-covers","title":"Camburg 110180 - 2019-2023 Ford Ranger 1.25\" Uniball Upper Control Arms","description":"The Camburg upper arms are designed to improve the performance and durability of your truck's suspension. They feature a larger 1.25 uni-ball bearing, which increases wheel travel and provides greater strength under extreme conditions. The arms also incorporate a billet aluminum cover to protect the uni-ball from dirt and contaminants. With CAD\/CAM engineering and precision manufacturing, these arms are made to strict standards. They correct camber and caster, eliminate weak factory ball-joints, and come with polyurethane frame pivot bushings with grease-able zerk fittings. The arms are made in the USA and designed for 1-3\" of lift. They include uniball spacers for both aluminum and steel OEM knuckles. Please note that they are compatible with US model trucks only.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818527633457,"sku":"CBG110180","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110180.jpg?v=1763165381"},{"product_id":"1-25-performance-uniball-upper-arms-w-covers-1","title":"Camburg 110187 - 1.25\" Performance Uniball Upper Arms (w\/ covers)","description":"Our updated design features a billet aluminum cover for the uniball, preventing dirt and contaminants from entering. The cap is press-fit with an O-ring seal. Our Camburg upper arms replace stock ball-joints with a larger 1.25 uni-ball bearing, increasing wheel travel and durability. We optimize geometry for correct alignment and improved handling using CAD\/CAM software and laser scanning. Manufactured in-house, our arms are laser cut, bent, MIG welded, sandblasted, and powder-coated. Machined parts include stainless steel uniball mis-alignment spacers. Features include increased wheel travel, corrected camber and caster, elimination of weak ball-joints, thick tubing, polyurethane bushings with grease-able fittings, PTFE-lined uniballs, steel gray powder-coating, and all necessary hardware. Designed for 1-3\" lift. Note that trimming may be required for certain wheel\/tire combinations, and larger OEM wheels\/tires may require hub-centric wheel spacers.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818527797297,"sku":"CBG110187","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110187.jpg?v=1763165382"},{"product_id":"1-25-performance-uniball-upper-arms-w-covers-2","title":"Camburg 110210 - 1.25\" Performance Uniball Upper Arms (w\/ covers)","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also incorporate a billet aluminum cover to protect the uniball from dirt and contaminants. Our arms are designed using CAD\/CAM engineering software and manufactured in-house with precision welding and machining. They come with polyurethane frame pivot bushings, FK 1.25\" PTFE-lined uniballs, and all necessary hardware for installation. These arms are compatible with lifts of 1-3\" and correct camber and caster.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818527993905,"sku":"CBG110210","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110210.jpg?v=1763165381"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms","title":"Camburg 110211 - KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"Introducing the Camburg KINETIK Series billet upper control arms for 2021-2024 Ford F-150's. These arms are meticulously designed and crafted from aerospace quality 6061 billet aluminum, providing superior strength and durability. They feature a larger FK 1.25\" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. The uniball is securely adapted to the spindle\/knuckle using model-specific spacers made from heat-treated stainless steel. The arms also utilize FK 7\/8\" chromoly heim joints for additional camber and caster adjustment, eliminating flexing and deflection under hard use. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure installation. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. These arms are compatible with 1-3\" of lift and are not compatible with vehicles equipped with Continuously Controlled Damping (CCD) adaptive suspension or adaptive headlamps with a position sensor attached to the OEM upper control arm.","brand":"Camburg","offers":[{"title":"Blue","offer_id":40841307422769,"sku":"CBG110211-BLU","price":1799.0,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":40841307455537,"sku":"CBG110211-GLD","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":40841307488305,"sku":"CBG110211-GRY","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":40841307521073,"sku":"CBG110211-RED","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110211-BLU.jpg?v=1763165383"},{"product_id":"camburg-ford-bronco-21-23-1-25-performance-uniball-upper-arms-w-covers","title":"Camburg Ford Bronco '21-23 1.25\" Performance Uniball Upper Arms (w\/ covers)","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also incorporate a billet aluminum cover to protect the uniball from dirt and contaminants. Our arms are designed using CAD\/CAM engineering software and manufactured in-house with precision welding and CNC machining. They come with polyurethane frame pivot bushings, grease-able zerk fittings, and FK 1.25\" PTFE-lined uniballs. The arms are powder-coated for durability and include all necessary hardware for installation. They are designed for 1-4.5\" of lift and are not compatible with the Bronco Raptor.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818528157745,"sku":"CBG110213","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110213.jpg?v=1763165382"},{"product_id":"camburg-ford-bronco-21-23-kinetik-v2-performance-billet-uniball-upper-arms","title":"KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.","brand":"Camburg","offers":[{"title":"Blue","offer_id":40841307815985,"sku":"CBG110214-BLU","price":1799.0,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":40841307848753,"sku":"CBG110214-GLD","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":40841307881521,"sku":"CBG110214-GRY","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":40841307914289,"sku":"CBG110214-RED","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110214-GRY.jpg?v=1763165382"},{"product_id":"camburg-ford-raptor-17-20-performance-slapper-lower-arm-kit","title":"Camburg Ford Raptor '17-20 Performance Slapper Lower Arm Kit","description":"Introducing our NEW performance lower arms for Gen 2 Ford Raptor owners. These stock length arms allow you to use your existing coilovers and upper arms, avoiding the need for fiberglass fenders and extended axles. We've included our optional 2.5 Slapper bump stop system for enhanced bottom out control. The wheelbase is slightly pushed forward, providing improved handling, increased tire clearance, and better suspension performance off-road. These arms are CAD\/CAM engineered, significantly stronger than stock arms, and designed for maximum ground clearance. They feature internal gusseting and pivot on FK 1\" uniballs at the frame, eliminating binding and flexing under braking. The uniball setup allows for bind-free adjustment and consistent geometry and alignment. Laser cut, CNC formed, MIG welded, and powder coated Camburg gray, these arms come with all necessary hardware for easy installation. Combine them with our KINETIK billet upper control arms, 2.5 Slapper bump stop system, and FOX or King 3.0 coilovers for the ultimate stock width setup. For larger tires, we recommend a zero offset wheel with a maximum backspacing of 5.00\". Please note that welding is required to install the bump stop kit, and the factory front sway-bar will be eliminated.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818528649265,"sku":"CBG110229","price":2995.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110229.jpg?v=1763752224"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-1","title":"Camburg 110230 - KINETIK V2 Performance Billet Uniball Upper Contol Arms","description":"Introducing the Camburg KINETIK Series billet upper control arms for 2004-2020 Ford F-150's. These arms are meticulously designed and crafted from aerospace quality 6061 billet aluminum, providing superior strength and durability. They feature a larger FK 1.25\" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. The uniball is securely adapted to the spindle\/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required for installation. The arms also utilize FK 7\/8\" chromoly heim joints for additional camber and caster adjustment, eliminating flexing and deflection under hard use. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure attachment. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. The arms are anodized gun metal gray and laser etched with the Camburg logo. All necessary hardware is included for easy installation. Designed and manufactured in the USA, these control arms are ideal for achieving 1-3\" of lift and are compatible with various tire sizes depending on lift height and other factors. Please note that factory 20\" wheels may require a wheel spacer, and we recommend aftermarket wheels with the correct offset for optimal performance and fit. ","brand":"Camburg","offers":[{"title":"Grey","offer_id":40841292841009,"sku":"CBG110230-GRY","price":1679.0,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":40841292873777,"sku":"CBG110230-BLU","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":40841292906545,"sku":"CBG110230-RED","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":40841292939313,"sku":"CBG110230-GLD","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110230-GRY.jpg?v=1763165382"},{"product_id":"camburg-ford-raptor-17-23-kinetik-v2-performance-billet-uniball-upper-arms","title":"Camburg Ford Raptor '17-23 KINETIK V2 Performance Billet Uniball Upper Arms","description":"Our Camburg KINETIK Series billet upper control arms are designed specifically for the 2017-24 Gen2 and Gen3 Ford Raptors, including the 2019+ models with FOX Live Valve electronic suspension. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, bead blasted, Type II anodized blue, and feature our Camburg logo laser etched. The arms utilize a larger FK 1.25\" uniball with a PTFE liner for increased strength and mis-alignment, allowing for maximum wheel travel. Made in the USA, these arms are superior to cheaper imports. The uniball is adapted to the spindle\/knuckle using model specific spacers machined from heat-treated stainless steel, ensuring a precise fit without the need for drilling or modifications. The 1.25\" uniball allows for a larger and stronger 9\/16\" 12 point bolt with a low profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is possible with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and braking without binding. AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure attachment of the heim joint. For 2019+ models with a position sensor incorporated into the FOX electronic suspension, stainless brackets are provided to attach to our arms for the sensor linkage, along with a drill template for proper positioning. The installation process is simple. The new V2 design of these control arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for installation, and the arms are designed for 1-3\" of lift. When using the factory OEM 17\" wheels, a 1\/4\" - 3\/8\" wheel spacer may be required when running larger tires than stock. We recommend zero offset wheels (5.00\" backspacing) when running larger tires than stock.","brand":"Camburg","offers":[{"title":"Blue","offer_id":40841270526001,"sku":"CBG110233-BLU","price":1999.0,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":40841270558769,"sku":"CBG110233-GLD","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":40841270591537,"sku":"CBG110233-GRY","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":40841270624305,"sku":"CBG110233-RED","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110233-BLU.jpg?v=1763165460"},{"product_id":"camburg-ford-raptor-21-23-performance-slapper-lower-arm-kit","title":"Camburg Ford Raptor '21-23 Performance Slapper Lower Arm Kit","description":"Introducing our NEW performance lower arms for '21-24 Gen 3 Ford Raptor owners. These stock length arms allow you to use your existing coilovers and upper arms without the need for fiberglass fenders or extended axles. They feature our optional 2.5 Slapper bump stop system for improved bottom out control. The wheelbase is slightly pushed forward, providing additional caster and tire clearance. CAD\/CAM engineered for maximum wheel travel and correct shock motion ratio geometry, these arms are stronger than stock and offer increased ground clearance. They pivot on FK 1\" uniballs at the frame, eliminating binding and flexing under braking. The uniball spacers provide better clamping force and prevent ovaling of the frame mounts. Laser cut, CNC formed, MIG welded, and powder coated Camburg gray, these arms come with all necessary hardware. Combine them with our KINETIK billet upper control arms and 2.5 Slapper bump stop system for the ultimate stock width setup. Welding is required for the bump stop kit installation, and the factory front sway-bar is eliminated.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818529009713,"sku":"CBG110249","price":2995.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110249.jpg?v=1763165382"},{"product_id":"1-25-performance-uniball-upper-arms","title":"1.25\" Performance Uniball Upper Arms","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. These arms also provide more caster and correct the camber curve for better alignment and improved driving characteristics. They are made with thicker 1.50\" x.188\" wall tubing for increased strength. Our arms are designed using CAD\/CAM engineering software and manufactured in-house with precision CNC laser cutting, bending, and MIG welding. They are sandblasted and powder-coated for a durable finish. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25\" PTFE-lined uniballs pre-installed. All necessary hardware is included for installation. It is important to note that these arms are specifically designed for use with our shocks and kits. Using them with longer shocks, shock spacers, or drop-down style lift kits can damage the arms and lead to uniball hardware failure. Please contact our sales department to confirm fitment if you have any questions.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531041329,"sku":"CBG210026","price":969.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210026.jpg?v=1763165382"},{"product_id":"camburg-chevy-gmc-1500-2wd-4wd-07-18-1-25-performance-uniball-upper-arms","title":"Camburg Chevy\/GMC 1500 2wd\/4wd '07-18 1.25\" Performance Uniball Upper Arms","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also adjust the caster and camber curve to correct geometry, enhancing driving characteristics and handling. Our arms are meticulously engineered using CAD\/CAM software and our in-house CNC machine shop produces all the necessary machined parts. The arms are made from thick .156\" wall round tubing, laser cut and CNC bent, and MIG welded in precision fixtures. They are then sandblasted and powder-coated for a durable finish. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25\" PTFE-lined uniballs pre-installed. All necessary hardware is included for installation. The arms are designed for 1-3\" of lift and also fit '07-20 Tahoe\/Yukon SUVs (without electronic controlled suspension). Please note that some factory wheels may require a wheel spacer and we recommend aftermarket wheels with a zero offset for optimum performance and fit. The factory droop stop must be removed from the frame mount. Our Camburg upper arms are proudly made in the USA and are the best available for your truck.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531172401,"sku":"CBG210051","price":999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210051.jpg?v=1763165381"},{"product_id":"camburg-chevy-gmc-colorado-2wd-4wd-15-22-1-25-performance-uniball-upper-arms","title":"Camburg Chevy\/GMC Colorado 2wd\/4wd '15-22 1.25\" Performance Uniball Upper Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and holds back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint with a uniball bearing we're able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156\" wall round tubing Laser cut and CNC bent tubes MIG welded CAD\/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.25\" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-2.5\" of lift Does not fit ZR2 models Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 1.25\" FK uniballs Does not fit ZR2 models Does not fit ZR2 models.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531237937,"sku":"CBG210054","price":999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210054.jpg?v=1763165384"},{"product_id":"camburg-chevy-gmc-1500-2wd-4wd-19-23-1-25-performance-uniball-upper-arms","title":"Camburg Chevy\/GMC 1500 2wd\/4wd '19-23 1.25\" Performance Uniball Upper Arms","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also adjust the caster and camber curve to correct geometry, resulting in improved driving characteristics and handling. Our arms are designed using CAD\/CAM engineering software and manufactured in-house with precision. They feature thicker .156\" wall round tubing, laser-cut and CNC-bent tubes, and MIG welding. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25\" PTFE-lined uniballs pre-installed. They are finished with steel gray powder-coating and include all necessary hardware for installation. Please note that these arms are not compatible with vehicles equipped with electronic adaptive ride control suspension systems. They are designed for 1-3\" of lift and may require trimming of plastic inner fenders to eliminate tire rubbing. Additionally, 20\" OEM wheels and tires and 18\" OEM wheels with larger tires than stock are not compatible with this suspension system.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531303473,"sku":"CBG210065","price":1049.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210065.jpg?v=1763165382"},{"product_id":"1-25-performance-uniball-upper-arms-w-covers-3","title":"1.25\" Performance Uniball Upper Arms (w\/ covers)","description":"New for 2020, our Camburg upper arms feature a billet aluminum cover for the uniball, protecting it from dirt and contaminants. The stock upper arms limit suspension performance when lifting your truck, but our arms address this issue. We replace the stock ball-joint with a larger 1.25 uni-ball bearing, increasing wheel travel and durability. The arms are made with thicker 1.50\" x.188\" wall tubing for strength and do not require removal of the factory droop stop\/perch. Our arms are designed using CAD\/CAM software and manufactured in-house with precision welding and CNC machining. They correct camber and caster, improve driving characteristics, and come with polyurethane frame pivot bushings and FK 1.25\" PTFE-lined uniballs. The arms are powder-coated and include all necessary hardware. They are designed for 1-3\" of lift and should not be used with longer shocks or lift kits without confirmation from our sales department.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531369009,"sku":"CBG210081","price":999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210081.jpg?v=1763165381"},{"product_id":"1-25-performance-uniball-upper-arms-w-covers-4","title":"1.25\" Performance Uniball Upper Arms (w\/ covers)","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a uniball bearing, we improve wheel travel and durability under extreme conditions. We also enhance the vehicle's alignment and driving characteristics by adjusting the camber curve and incorporating larger and stronger FK 7\/8\" chromoly heim joints for additional camber and caster adjustment. The billet aluminum cover on top of the uniball prevents dirt and contaminants from entering. Our arms are meticulously designed using CAD\/CAM engineering software and manufactured in-house with precision CNC laser cutting, bending, and MIG welding. They are then sandblasted and powder-coated for a durable finish. Our machined parts, including the uniball mis-alignment spacers, are made from heat-treated stainless steel in our CNC machine shop. The arms come with all necessary hardware and are designed for 1-2.5\" of lift. They are specifically designed for ZR2 models and are made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531434545,"sku":"CBG210096","price":1399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210096.jpg?v=1763165382"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-2","title":"KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"You asked for it! Now we offer our KINETIK billet upper arms anodized to match your King shocks to really show off your suspension. Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. These can allow for more wheel travel with extended length coilovers and we correct the suspension geometry with an increase in caster to improve the handling both on and off-road. This gives your truck a much more predictable and precision feel, especially once you leave the pavement and hit the dirt. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a 12 point bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.","brand":"Camburg","offers":[{"title":"Blue","offer_id":40841306734641,"sku":"CBG210099-BLU","price":1799.0,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":40841306767409,"sku":"CBG210099-GLD","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":40841306800177,"sku":"CBG210099-GRY","price":1599.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":40841306832945,"sku":"CBG210099-RED","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210099-BLU.jpg?v=1763165383"},{"product_id":"1-00-performance-uniball-upper-arms","title":"1.00\" Performance Uniball Upper Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.00 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156\" wall round tubing Laser cut and CNC bent tubes MIG welded CAD\/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.00\" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3\" of lift Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 1.00\" FK uniballs.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531631153,"sku":"CBG310005","price":929.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310005.jpg?v=1763752222"},{"product_id":"camburg-toyota-tundra-2wd-4wd-00-06-1-00-performance-uniball-upper-arms","title":"Camburg Toyota Tundra 2wd\/4wd '00-06 1.00\" Performance Uniball Upper Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper control arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.00 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156\" wall round tubing Laser cut and CNC bent tubes MIG welded CAD\/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.00\" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3\" of lift. These also fit 2001-2007 Toyota Sequoia's. These also fit 2001-2007 Toyota Sequoia's.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818531696689,"sku":"CBG310006","price":849.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310006.jpg?v=1763165382"},{"product_id":"1-25-performance-uniball-upper-arms-1","title":"Camburg 310036 - 1.25\" Tubular Uniball Upper Control Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818532220977,"sku":"CBG310036","price":1079.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310036.jpg?v=1763165382"},{"product_id":"camburg-toyota-tundra-2wd-4wd-07-21-1-50-performance-uniball-upper-arms","title":"Camburg Toyota Tundra 2wd\/4wd '07-21 1.50\" Performance Uniball Upper Arms","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.50 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also adjust the camber curve and increase caster to correct geometry, resulting in improved driving characteristics and handling. Our arms are designed using CAD\/CAM engineering software and manufactured in-house with precision. They feature thicker .156\" wall round tubing, laser-cut and CNC-bent tubes, and MIG welding. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings, FK 1.50\" PTFE-lined uniballs, and steel gray powder-coating. All necessary hardware is included for installation. The arms are made in the USA and designed for 1-3\" of lift, compatible with 2008-2022 Toyota Sequoias. Additionally, this suspension system is not compatible with 20\" OEM wheels and tires and 18\" OEM wheels with larger tires than stock.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818532352049,"sku":"CBG310041","price":1009.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310041.jpg?v=1763165382"},{"product_id":"camburg-toyota-landcruiser-200-series-08-21-1-25-performance-upper-arms","title":"Camburg Toyota Landcruiser 200 Series '08-21 1.25\" Performance Upper Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818532417585,"sku":"CBG310042","price":1199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310042.jpg?v=1763165381"},{"product_id":"camburg-toyota-tacoma-pre-4wd-05-23-performance-x-joint-upper-arms","title":"Camburg Toyota Tacoma Pre\/4wd '05-23 Performance X-Joint Upper Arms","description":"Introducing the Camburg X-Joint, a high-performance ball-joint designed for extreme conditions. Made with heat-treated materials and an improved boot design, it offers increased strength, better greasing, and extended longevity. The fully sealed dual lip seal design prevents contamination from dirt, sand, rain, mud, and snow. With a grease zerk fitting, you can easily grease the joint without removing the boot. Specifically designed for our ball-joint upper arms, the X-Joint provides optimum fit and maximum wheel travel. It corrects suspension geometry, improves handling, and allows for a wider range of alignment adjustment. The tubular construction offers more tire and shock clearance compared to stock arms. CNC bent tubes, MIG welded, and featuring thicker .156\" wall round tubing, these arms are built to last. Polyurethane frame pivot bushings with grease-able zerk fittings ensure smooth operation. The Camburg X-Joint comes pre-installed with billet aluminum covers and a matte black powder-coating. All necessary hardware is included for easy installation. Designed for 1-3\" of lift, it increases usable wheel travel and corrects camber and caster. Made in the USA in-house, the Camburg X-Joint is the perfect upgrade for 6 lug model trucks.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818532974641,"sku":"CBG310078","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310078.jpg?v=1763165382"},{"product_id":"camburg-toyota-tundra-2wd-4wd-07-21-performance-x-joint-upper-arms","title":"Camburg Toyota Tundra 2wd\/4wd '07-21 Performance X-Joint Upper Arms","description":"Introducing the Camburg X-Joint, a high-performance ball-joint designed for extreme conditions. Made with heat-treated materials and an improved boot design, it offers increased strength, better greasing, and longer lifespan. The dual lip seal design prevents contamination, while the grease zerk fitting allows for easy maintenance. Specifically designed for our ball-joint upper arms, it provides optimal fit and maximum wheel travel. These arms correct suspension geometry, improve handling, and offer a wider range of alignment adjustment. With CNC bent tubes, MIG welded construction, and polyurethane frame pivot bushings, they are built to last. The package includes all necessary hardware and is made in the USA. ","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818533105713,"sku":"CBG310083","price":1009.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310083.jpg?v=1763165382"},{"product_id":"1-25-performance-uniball-upper-arms-w-covers-5","title":"1.25\" Performance Uniball Upper Arms (w\/ covers)","description":"Our updated design features a billet aluminum cover for the uniball, providing protection against dirt and contaminants. The cap is press-fit and sealed with an O-ring. Our Camburg upper arms replace the stock ball-joint with a larger 1.25 uni-ball bearing, increasing wheel travel and durability. We also improve caster and camber curves for better alignment and handling. Our arms are designed using CAD\/CAM software and manufactured in-house with precision welding and CNC machining. They come with polyurethane frame pivot bushings, grease-able zerk fittings, and FK 1.25\" PTFE-lined uniballs. The arms are powder-coated and include all necessary hardware. They are designed for 1-3\" of lift and fit 6 lug model trucks.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818533302321,"sku":"CBG310130","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310130.jpg?v=1763165382"},{"product_id":"performance-slapper-lower-arm-kit","title":"Performance Slapper Lower Arm Kit","description":"Introducing our NEW performance lower arms for Tacoma owners. These stock length arms allow you to use your existing coilovers and upper arms, eliminating the need for fiberglass fenders and extended axles. We've included our optional 2.5 Slapper bump stop system for enhanced bottom out control. The arms are CAD\/CAM engineered, providing maximum wheel travel and correct shock motion ratio geometry. They are considerably stronger than stock arms, with internal gusseting and FK 1\" uniball pivots for zero binding and consistent alignment. The arms are laser cut, CNC formed, MIG welded, and powder coated for durability. Installation requires welding\/cutting\/grinding and is compatible with 6 lug 4WD and Prerunner RWD models. Combine with our KINETIK billet upper control arms, 2.5 Slapper bump stop system, and FOX or King coilovers for the ultimate stock width setup.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818533433393,"sku":"CBG310166","price":2295.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310166.jpg?v=1763165382"},{"product_id":"performance-slapper-lower-arm-kit-1","title":"Performance Slapper Lower Arm Kit","description":"Introducing our NEW performance lower arms for Tacoma owners. These stock length arms allow you to use your existing coilovers and upper arms, eliminating the need for fiberglass fenders and extended axles. We've included our optional 2.5 Slapper bump stop system for enhanced bottom out control. The arms are CAD\/CAM engineered, providing maximum wheel travel and correct shock motion ratio geometry. They are considerably stronger than stock arms, with internal gusseting and FK 1\" uniball pivots for zero binding and consistent alignment. The arms are laser cut, CNC formed, MIG welded, and powder coated for durability. Installation requires welding\/cutting\/grinding and is compatible with 6 lug 4WD and Prerunner RWD models. Combine with our KINETIK billet upper control arms, 2.5 Slapper bump stop system, and FOX or King coilovers for the ultimate stock width setup.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818533597233,"sku":"CBG310167","price":2295.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310167.jpg?v=1763165381"},{"product_id":"camburg-toyota-landcruiser-300-series-22-23-performance-lower-arm-kit","title":"Camburg Toyota Landcruiser 300 Series '22-23 Performance Lower Arm Kit","description":"Our performance lower arms are designed to replace stock length lowers and offer several benefits. They are compatible with stock rubber bump stops or can be upgraded to a FOX or King bump stop for increased bottoming resistance. These arms prioritize ground clearance and off-road performance, featuring internal gusseting and pivot on FK 1\" uniballs at the frame. Uniballs ensure zero binding during suspension cycling and zero flex under braking, resulting in consistent geometry and alignment. The uniball spacers have a diameter of 1.50\", providing better clamping force in the frame mounts and preventing ovaling out over time. The lower ball-joint is replaced with an FK 1.00\" uniball at the spindle for maximum strength and articulation. No modification to the spindle taper is required as machined heat-treated stainless-steel mis-alignment spacers are used. Our one-piece tapered uniball spacer is designed for superior strength. The arms come ready to install with all necessary hardware included and are the strongest stock length aftermarket arms available on the market.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818533859377,"sku":"CBG310174","price":2599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310174.jpg?v=1763165382"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-red","title":"Camburg 110214 - KINETIK V2 Performance Billet Uniball Upper Arms","description":"Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized gun metal gray and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863119966257,"sku":"CBG110214-1","price":1599.99,"currency_code":"USD","in_stock":false}]},{"product_id":"camburg-ford-raptor-10-14-1-50-performance-uniball-heim-upper-control-arms","title":"Camburg Ford Raptor '10-14 1.50\" Performance Uniball Heim Upper Control Arms","description":"Here are our Camburg 1.50 uniball upper arms for the Ford Raptor. These arms are made with US 4130 chromoly tubing, heat treated stainless steel hardware, and US made FK 1.50\" uni-balls. Main improvements are 7\/8\" heim pivots for more adjustment, less flex, and a more precision cycle of travel. The strength of these upper arms are far superior to the factory units because of the much larger tube size and the huge 1.50\" uni-ball which is the same version as on our Trophy Truck. These upper arms will also allow more wheel travel when combined with other aftermarket shocks. Increases usable wheel travel Corrects camber and caster Eliminates weak factory joints Made in the USA FK 1.50\" Uniballs and JMX 7\/8\" Heims Heat-treated Stainless Steel Heim and Uniball Spacers Will not fit OEM stock wheels, use our 1.25\" uniball version Made in the USA 1.50 FK uniballs 7\/8\" FK heims 4130 tubular construction Improved geometry Will not fit OEM stock wheels, use our 1.25\" uniball version.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863180947505,"sku":"CBG110079","price":1499.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110079.jpg?v=1765390520"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-blue","title":"KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use. These heims are considerably stronger than the smaller and cheaper versions many competitors use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863193923633,"sku":"CBG110250-BLU","price":1679.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110250-BLU.jpg?v=1765391475"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-gold","title":"KINETIK V2 Performance Billet Uniball Upper Arms (GOLD)","description":"Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized gold and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use. These heims are considerably stronger than the smaller and cheaper versions many competitors use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863194021937,"sku":"CBG110250-GLD","price":1679.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110250-GLD.jpg?v=1765391482"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-grey","title":"KINETIK V2 Performance Billet Uniball Upper Arms - Grey","description":"Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized gun metal gray and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use. These heims are considerably stronger than the smaller and cheaper versions many competitors use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863194087473,"sku":"CBG110250-GRY","price":1579.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110250-GRY.jpg?v=1765391489"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-red-1","title":"KINETIK V2 Performance Billet Uniball Upper Arms (RED)","description":"Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized red and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use. These heims are considerably stronger than the smaller and cheaper versions many competitors use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863194185777,"sku":"CBG110250-RED","price":1679.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110250-RED.jpg?v=1765391496"},{"product_id":"camburg-toyota-hilux-05-21-1-25-performance-uniball-upper-control-arms","title":"Camburg Toyota Hilux 05-21 1.25\" Performance Uniball Upper Control Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156\" wall round tubing Laser cut and CNC bent tubes MIG welded CAD\/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.25\" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3\" of lift Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 1.25\" FK uniballs.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863211225137,"sku":"CBG310043","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310043.jpg?v=1765392588"},{"product_id":"camburg-toyota-prado-120-150-03-21-1-25-performance-uniball-upper-control-arms","title":"Camburg Toyota Prado 120\/150 03-21 1.25\" Performance Uniball Upper Control Arms","description":"When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD\/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 4130 chromoly construction Laser cut and CNC bent tubes MIG welded CAD\/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.25\" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3\" of lift Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 1.25\" FK uniballs 4130 chromoly construction.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863211487281,"sku":"CBG310044","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310044.jpg?v=1765392596"},{"product_id":"1-25-performance-heim-uniball-upper-control-arms","title":"1.25\" Performance Heim\/Uniball Upper Control Arms","description":"Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a uniball bearing, we improve wheel travel and durability under extreme conditions. We also enhance the vehicle's alignment, driving characteristics, and handling by adjusting the camber curve and adding more caster. Our arms feature stronger FK 3\/4\" chromoly heim joints for additional camber and caster adjustment, eliminating flexing and deflection during hard use and braking. Using advanced CAD\/CAM engineering software and our FARO laser scan arm, we ensure precise design and fit. The arms are manufactured in-house, with CNC laser-cut and bent tubes that are MIG welded in precision fixtures. They are then sandblasted and powder-coated for durability. Our in-house CNC machine shop produces all the machined parts, including the uniball mis-alignment spacers made from heat-treated stainless steel. The arms come with all necessary hardware for installation and are made in the USA. They are designed for 1-3\" of lift, increase usable wheel travel, correct camber and caster, and eliminate weak factory ball-joints.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863229476913,"sku":"CBG310164","price":1299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310164.jpg?v=1765393634"},{"product_id":"camburg-toyota-landcruiser-200-series-08-21-performance-lower-control-arm-kit","title":"Camburg Toyota Landcruiser 200 Series 08-21 Performance Lower Control Arm Kit","description":"Our performance lower arms are designed to replace the stock length lowers and offer the option to keep the stock rubber bump stop or upgrade to a FOX or King bump stop for increased bottoming resistance. These arms are CAD\/CAM engineered for maximum wheel travel and correct shock motion ratio geometry. They are considerably stronger than the stock arms, with internal gusseting and pivots on FK 1\" uniballs at the frame for zero binding and consistent geometry. The uniball spacers have a larger diameter for better clamping force and to prevent ovaling out over time. We replace the lower ball-joint with an FK 1.00\" uniball at the spindle for maximum strength and articulation. No modification to the spindle taper is necessary as we use machined heat-treated stainless-steel mis-alignment spacers. The arms are made with high-quality materials, CAD designed, laser cut, CNC formed, MIG welded, and powder coated. They are compatible with King 3.0 and FOX 2.5 DSC coilovers and are the strongest stock length aftermarket arms available. ","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863229575217,"sku":"CBG310165","price":2599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310165.jpg?v=1765393642"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-blue-1","title":"KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek blue finish. The arms feature a larger FK 1.25\" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. They are made in the USA and are superior to cheaper imports. The uniball is adapted to the spindle\/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required. The arms also utilize larger and stronger FK 7\/8\" chromoly heim joints for additional camber and caster adjustment. These heim joints eliminate flexing\/deflection and provide zero binding under hard use and braking. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure attachment. The V2 design of these arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. They are designed for 1-3\" of lift and come with all necessary hardware for installation.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863234392113,"sku":"CBG310184-BLU","price":1699.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310184-BLU.jpg?v=1765393793"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-gold-1","title":"KINETIK V2 Performance Billet Uniball Upper Arms (GOLD)","description":"These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gold finish. The arms feature a larger FK 1.25\" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. They are made in the USA and are superior to cheaper imports. The uniball is adapted to the spindle\/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required. The arms also utilize larger and stronger FK 7\/8\" chromoly heim joints for additional camber and caster adjustment. These heim joints eliminate flexing\/deflection and provide zero binding under hard use and braking. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure attachment. The V2 design of these arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. They are designed for 1-3\" of lift and come with all necessary hardware for installation.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863235735601,"sku":"CBG310184-GLD","price":1699.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310184-GLD.jpg?v=1765393799"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-grey-1","title":"KINETIK V2 Performance Billet Uniball Upper Arms - Grey","description":"These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gun metal gray finish. The arms feature a larger FK 1.25\" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. They are made in the USA and are superior to cheaper imports. The uniball is adapted to the spindle\/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required. The arms also utilize larger and stronger FK 7\/8\" chromoly heim joints for additional camber and caster adjustment. These heim joints eliminate flexing\/deflection and provide zero binding under hard use and braking. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure attachment. The V2 design of these arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. They are designed for 1-3\" of lift and come with all necessary hardware for installation.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863235866673,"sku":"CBG310184-GRY","price":1599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310184-GRY_4736d711-1e48-4602-97c1-b4e4f360a997.jpg?v=1765393806"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-red-2","title":"KINETIK V2 Performance Billet Uniball Upper Arms (RED)","description":"These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek red finish. The arms feature a larger FK 1.25\" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. They are made in the USA and are superior to cheaper imports. The uniball is adapted to the spindle\/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required. The arms also utilize larger and stronger FK 7\/8\" chromoly heim joints for additional camber and caster adjustment. These heim joints eliminate flexing\/deflection and provide zero binding under hard use and braking. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure attachment. The V2 design of these arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. They are designed for 1-3\" of lift and come with all necessary hardware for installation.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863236030513,"sku":"CBG310184-RED","price":1699.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310184-RED.jpg?v=1765393814"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-blue-2","title":"KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"You asked for it! Now we offer our KINETIK billet upper arms anodized to match your King shocks to really show off your suspension. Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. These can allow for more wheel travel with extended length coilovers and we correct the suspension geometry with an increase in caster to improve the handling both on and off-road. This gives your truck a much more predictable and precision feel, especially once you leave the pavement and hit the dirt. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a 12 point bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863236096049,"sku":"CBG310187-BLU","price":1749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310187-BLU.jpg?v=1765393821"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-gold-2","title":"KINETIK V2 Performance Billet Uniball Upper Arms (GOLD)","description":"Elevate your suspension with the Camburg Kinetik Billet Uniball Upper Control Arms, now available in a stunning gold finish! Crafted for durability and performance, these control arms feature a precision-engineered design that enhances your off-road capabilities. The gold finish adds a touch of sophistication to your setup. Built with precision, these control arms incorporate high-quality uniball joints for improved suspension travel and strength. Upgrade your suspension system with the Camburg Kinetik Billet Uniball Upper Control Arms in gold, and conquer the trails with confidence, enjoying smoother rides and greater control during your off-road adventures.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863236259889,"sku":"CBG310187-GLD","price":1749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310187-GLD.jpg?v=1765393828"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-grey-2","title":"KINETIK V2 Performance Billet Uniball Upper Arms - Grey","description":"Introducing the Camburg KINETIK Series billet upper arms, the ultimate setup for your rig. These arms are meticulously designed and refined to meet our high standards. CNC machined from aerospace quality 6061 billet aluminum, they are bead blasted, Type II anodized gun metal gray, and feature our laser-etched Camburg logo. Equipped with a larger FK 1.50\" uniball with a PTFE liner, these arms offer increased strength and mis-alignment for maximum wheel travel. Made in the USA, they are far superior to cheaper imports. The uniball is adapted to the spindle\/knuckle using model-specific spacers machined from heat-treated stainless steel. No drilling or modifications are required. The 1.50\" uniball allows for a larger and stronger 9\/16\" 12-point bolt with a low-profile press-on uniball cap for durability. Additional camber and caster adjustment is possible with the use of larger and stronger FK 7\/8\" chromoly heim joints, which also eliminate flexing\/deflection under hard use and braking without binding. The arms come with AN\/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure heim joint attachment. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for easy installation. Designed for 1-3\" of lift, these arms also fit 2008-2022 Toyota Sequoias.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863236358193,"sku":"CBG310187-GRY","price":1649.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310187-GRY_9adc92a5-dda6-4519-af83-c177a6c87b44.jpg?v=1765393836"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-red-3","title":"KINETIK V2 Performance Billet Uniball Upper Arms (RED)","description":"Elevate your suspension with the Camburg Kinetik Billet Uniball Upper Control Arms, now available in a radiant red finish! Crafted for durability and performance, these control arms feature a precision-engineered design that enhances your off-road capabilities. The gold finish adds a touch of sophistication to your setup. Built with precision, these control arms incorporate high-quality uniball joints for improved suspension travel and strength. Upgrade your suspension system with the Camburg Kinetik Billet Uniball Upper Control Arms in gold, and conquer the trails with confidence, enjoying smoother rides and greater control during your off-road adventures.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863236423729,"sku":"CBG310187-RED","price":1749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310187-RED.jpg?v=1765393843"},{"product_id":"kinetik-v2-performance-billet-uniball-upper-arms-blue-3","title":"KINETIK V2 Performance Billet Uniball Upper Arms (BLUE)","description":"You asked for it! Now we offer our KINETIK billet upper arms anodized to match your King shocks to really show off your suspension. Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. These can allow for more wheel travel with extended length coilovers and we correct the suspension geometry with an increase in caster to improve the handling both on and off-road. This gives your truck a much more predictable and precision feel, especially once you leave the pavement and hit the dirt. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle\/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a 12 point bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7\/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing\/deflection under hard use and braking with zero binding when in use. Using AN\/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863236554801,"sku":"CBG310189-BLU","price":1799.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-310189-BLU.jpg?v=1765393850"}],"url":"https:\/\/www.shocksurplus.com\/collections\/suspension-control-arm-kit.oembed","provider":"Shock Surplus","version":"1.0","type":"link"}