{"title":"Suspension Lift Kit","description":null,"products":[{"product_id":"camburg-ford-ranger-xlt-2wd-01-12-fox-performance-5-50-kit","title":"Camburg Ford Ranger XLT 2wd '01-12 FOX Performance 5.50\" Kit","description":"Our 5.5 kit for the RWD Ford Rangers set the bar years ago as the best performance kit available. The kit uses our 3\" lift fabricated race spindles with a massive 1\" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10\" of useable wheel travel. The upper arms are made from 1.50\" x.120 wall 4130 chromoly tubing and double shears the uniball. We use FOX 2.0 series for added control that bolt right in and are valved for this kit. Our coil springs provide 2.5\" lift and are heat-treated and stress relieved. Track width is  increased 1.5\" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit. This kit fits RWD Rangers with coil springs only. For torsion bar trucks use our Ranger Edge 6.0 kits. 1998-2000 models require the larger 2001+ 11.25\" OD brake rotors Must re-use the factory OEM spindle snouts\/pins. Aftermarket versions will not work Fiberglass front fenders required to run 33\" tires.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818526847025,"sku":"CBG110007-2","price":3055.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110007-2.jpg?v=1763165382"},{"product_id":"camburg-chevy-gmc-1500-2wd-99-06-6-50-performance-kit","title":"Camburg Chevy\/GMC 1500 2wd '99-06 6.50\" Performance Kit","description":"The next best thing to a long travel kit! The Chevrolet 1500 Performance off-road system will give you 10\" of wheel travel and 1.5\" wider per side track-width. This system is designed to give you great off-road performance. By eliminating the upper stock ball joint (weak link) with a 1\" FK uniball we gain a great amount of wheel travel and strength. We also chose to eliminate the stock cast spindles and replace them with a pair of our fabricated spindles. These spindles use some of the same parts found in our long travel system. If you are looking for wheel travel, ground clearance, and strength look no further. The Camburg Performance 6.5 kit is what you need! Fabricated spindles 6\" lift 10\" wheel travel 1.5\" wider per side Made in the USA You will need to run fiberglass front fenders with 35\" tires. Limit strap installation requires minor welding and drilling. Factory upper arm frame droop stops must be removed or damage to our upper arm will occur due to the increase in wheel travel.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40818530910257,"sku":"CBG210001","price":3007.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-210001.jpg?v=1763165382"},{"product_id":"camburg-ford-ranger-xlt-2wd-98-12-bilstein-performance-5-5-kit","title":"CAMBURG FORD RANGER XLT 2WD 98-12 BILSTEIN PERFORMANCE 5.5 KIT","description":"Our 5.5 kit for the RWD Ford Rangers set the bar years ago as the best performance kit available. The kit uses our 3\" lift fabricated race spindles with a massive 1\" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10\" of useable wheel travel. The upper arms are made from 1.50\" x.120 wall 4130 chromoly tubing and double shears the uniball. We use Bilstein 5100 series for added control that bolt right in and are valved for this kit. Our coil springs provide 2.5\" lift and are heat-treated and stress relieved. Track width is  increased 1.5\" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit. This kit fits RWD Rangers with coil springs only. For torsion bar trucks use our Ranger Edge 6.0 kits. 1998-2000 models require the larger 2001+ 11.25\" OD brake rotors.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863179178033,"sku":"CBG110006","price":2901.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110006_P04.jpg?v=1765390420"},{"product_id":"camburg-ford-ranger-xlt-2wd-98-12-fox-performance-5-5-kit-1998-2000","title":"Camburg Ford Ranger XLT 2wd 98-12 FOX Performance 5.5 Kit - 1998-2000","description":"Our 5.5 kit for the RWD Ford Rangers set the bar years ago as the best performance kit available. The kit uses our 3\" lift fabricated race spindles with a massive 1\" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10\" of useable wheel travel. The upper arms are made from 1.50\" x.120 wall 4130 chromoly tubing and double shears the uniball. We use FOX 2.0 series for added control that bolt right in and are valved for this kit. Our coil springs provide 2.5\" lift and are heat-treated and stress relieved. Track width is  increased 1.5\" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit. This kit fits RWD Rangers with coil springs only. For torsion bar trucks use our Ranger Edge 6.0 kits. 1998-2000 models require the larger 2001+ 11.25\" OD brake rotors Must re-use the factory OEM spindle snouts\/pins. Aftermarket versions will not work Fiberglass front fenders required to run 33\" tires.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863179276337,"sku":"CBG110006-2","price":3045.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110006-2.jpg?v=1765390428"},{"product_id":"camburg-ford-ranger-edge-2wd-01-12-entry-level-6-0-kit","title":"Camburg Ford Ranger Edge 2wd 01-12 Entry Level 6.0 Kit","description":"Our 6.0 kit for the RWD Ford Rangers set the bar years ago as the best performance kit available. The kit uses our 3\" lift fabricated race spindles with a massive 1\" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10\" of useable wheel travel. The upper arms are made from 1.50\" x.120 wall 4130 chromoly tubing and double shears the uniball. We use Bilstein 5100 series shocks for added control and are valved for this kit. By adjusting the torsion bars you can setup the front end with 4-6\" of lift. Track width is  increased 1.5\" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit. This kit fits RWD Rangers with torsion bars only. For coil spring trucks use our Ranger XLT 5.5 kits.** This also fits RWD 1995-2005 Explorers and 2001-2006 SportTrac’s with 11.25\" brake rotors. Call for more info. 4-6\" of lift 8\" of wheel travel 1.5\" wider per side Made in the USA Must re-use the factory OEM spindle snouts\/pins. Aftermarket versions will not work Fiberglass front fenders required to run 33\" tires.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863179374641,"sku":"CBG110008","price":2707.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110008.jpg?v=1765390440"},{"product_id":"camburg-ford-ranger-edge-2wd-01-12-bilstein-performance-6-0-kit","title":"Camburg Ford Ranger Edge 2wd 01-12 Bilstein Performance 6.0 Kit","description":"Our 6.0 kit for the RWD Ford Rangers set the bar years ago as the best performance kit available. The kit uses our 3\" lift fabricated race spindles with a massive 1\" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10\" of useable wheel travel. The upper arms are made from 1.50\" x.120 wall 4130 chromoly tubing and double shears the uniball. With our weld-on dual shock mount we use Bilstein 5100 series for added control and are valved for this kit. By adjusting the torsion bars you can setup the front end with 4-6\" of lift. Track width is  increased 1.5\" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit. This kit fits RWD Rangers with torsion bars only. For coil spring trucks use our Ranger XLT 5.5 kits.** This also fits RWD 1995-2005 Explorers and 2001-2005 SportTrac's with 11.25\" brake rotors. Call for more info. 4-6\" of lift 10\" of wheel travel 1.5\" wider per side Dual Bilstein 5100 shocks Must re-use the factory OEM spindle snouts\/pins. Aftermarket versions will not work Fiberglass front fenders required to run 33\" tires Cutting and welding is required to install this kit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863180095537,"sku":"CBG110009","price":3259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110009.jpg?v=1765390448"},{"product_id":"camburg-ford-ranger-edge-2wd-01-12-fox-performance-6-0-kit","title":"Camburg Ford Ranger Edge 2wd 01-12 FOX Performance 6.0 Kit","description":"Our 6.0 kit for the RWD Ford Rangers set the bar years ago as the best performance kit available. The kit uses our 3\" lift fabricated race spindles with a massive 1\" vertical uniball that replaces the weak upper ball-joint that is prone to fail. This allows for 10\" of useable wheel travel. The upper arms are made from 1.50\" x.120 wall 4130 chromoly tubing and double shears the uniball. With our weld-on dual shock mount we use upgraded FOX 2.0 Performance Series for added control and higher oil capacity which are valved specific for this kit. By adjusting the torsion bars you can setup the front end with 4-6\" of lift. Track width is  increased 1.5\" per side giving you a wider stance for better stability and added wheel travel. This is why Fiberglass front fenders are highly recommended. We now include our weld-on upper frame gusset reinforcement kit. This kit fits RWD Rangers with torsion bars only. For coil spring trucks use our Ranger XLT 5.5 kits.** This also fits RWD 1995-2005 Explorers and 2001-2005 SportTrac's with 11.25\" brake rotors. Call for more info. 4-6\" of lift 10\" of wheel travel 1.5\" wider per side Dual FOX 2.0 shocks Must re-use the factory OEM spindle snouts\/pins. Aftermarket versions will not work Fiberglass front fenders required to run 33\" tires Cutting and welding is required to install this kit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863180193841,"sku":"CBG110009-2","price":3515.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110009-2.jpg?v=1765390455"},{"product_id":"camburg-ford-e-series-250-350-van-2wd-97-04-trail-series-kit-w-o-shocks","title":"Camburg Ford E-Series 250\/350 Van 2wd 97-04 Trail Series Kit w\/o Shocks","description":"For you do it yourselfers, we offer a kit you can install yourself or have your local shop install if you have a 1997-2004 E-250\/350 model van. Instead of bending the I-beams to correct camber geometry, we designed and built new I-beam pivot brackets. Now this isn’t our preferred method, but is an option available to customers that are on a budget or just not able to have us install the Baja kit in-house. Newer 2005-2014 vans that have the RSC stability\/traction control will have issues with this type of kit as it upsets the stability control system and makes the van un-drivable. Our Baja kit works seamless with all vans and is the preferred suspension system for the E-Series vans and has the best handling and ride quality.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863181307953,"sku":"CBG110086","price":3485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110086.jpg?v=1765390543"},{"product_id":"camburg-ford-e-series-250-350-van-2wd-97-04-trail-series-kit-w-fox-2-00","title":"Camburg Ford E-Series 250\/350 Van 2wd 97-04 Trail Series Kit w\/ FOX 2.00\"","description":"For you do it yourselfers, we offer a kit you can install yourself or have your local shop install if you have a 1997-2004 E-250\/350 model van. Instead of bending the I-beams to correct camber geometry, we designed and built new I-beam pivot brackets. Now this isn’t our preferred method, but is an option available to customers that are on a budget or just not able to have us install the Baja kit in-house. Newer 2005-2014 vans that have the RSC stability\/traction control will have issues with this type of kit as it upsets the stability control system and makes the van un-drivable. Our Baja kit works seamless with all vans and is the preferred suspension system for the E-Series vans and has the best handling and ride quality. We also offer a FOX 2.0 Factory Series remote shock upgrade for the front that holds more oil, is rebuildable and revealable that is tuned for off-road use and heavier van setups.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863181406257,"sku":"CBG110086-1","price":4100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110086-1.jpg?v=1765390550"},{"product_id":"camburg-ford-raptor-10-14-fox-3-0-factory-dsc-kit","title":"Camburg Ford Raptor 10-14 FOX 3.0 Factory DSC Kit","description":"FOX's 3.0 Factory Series Coil-over Internal Bypass shocks are designed for racing and off-road driving. They have increased oil capacity and provide 60% more damping area compared to stock shocks. Made of heavy-duty steel with anodized billet aluminum components, these shocks offer a plush ride for normal off-road conditions and can ramp up damping force for extreme use. They are easily installed on factory mounts and come with an adjustable coil spring for preload and ride height. The shocks have large 2.5 inch remote reservoirs with -10 hose for improved cooling. The Dual Speed Compression (DSC) adjuster allows for precise tuning with twelve low-speed and ten high-speed compression levels. These shocks utilize components from FOX's race-winning Trophy Truck shocks, including Eibach springs, stainless steel shock shafts, PTFE-lined spherical bearings, racing oil, and high-temp Viton seals. In the rear, the SVT Raptor is equipped with FOX's FACTORY Series 3.0 Bypass shocks, which have three independently tunable bypass zones for complete ride control on any terrain. These shocks also feature 2.5 inch diameter Piggyback reservoirs, lined spherical bearings, racing oil, and Viton seals for exceptional performance and durability. Pairing these shocks with aftermarket leaf springs and bump stop kits further enhances the SVT Raptor's off-road capabilities. FOX's upper arms for the SVT Raptor are made with US 4130 chromoly tubing and heat-treated stainless steel hardware. They feature FK 1.50\" uni-balls for increased adjustment, less flex, and precise travel. These upper arms improve wheel travel, correct camber and caster, and eliminate weak factory joints. They are made in the USA. Please note that these upper arms will not fit OEM stock wheels; a 1.25\" uniball version is available for that purpose. With 0-2\" of lift, these upper arms increase wheel travel and improve handling.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863182258225,"sku":"CBG110097-U","price":8198.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110097-U.jpg?v=1765390564"},{"product_id":"camburg-ford-raptor-17-18-fox-factory-3-0-dsc-performance-kit","title":"Camburg Ford Raptor 17-18 FOX Factory 3.0 DSC Performance Kit","description":"Our FOX 3.0 Performance kit for the Ford Raptor takes it to the next level. We utilize FOX’s 3.0 series internal bypass DSC front coilovers. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel and correct geometry. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. In the rear we go with a pair of FOX’s 3.0 series bypass shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The bypass adjusters allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. Since they are longer in length they increase rear wheel travel and articulation. The bypass shocks have a lot more bottoming control for the bigger hits off-road. This can be used on 2019-2020 models but requires the Damper Interface Module installed. 0-2\" lift (front) Corrected geometry with upper arms Improved handling on and off-road When using the factory OEM 17\" wheel or positive offset wheel, you may need a 1\/4\" – 3\/8\" wheel spacer when running larger 37\" or wider tires than stock. We recommend a zero offset wheel.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863183372337,"sku":"CBG110142-K","price":9658.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110142-K.jpg?v=1765390666"},{"product_id":"camburg-ford-raptor-17-18-fox-3-0-factory-dsc-kit-uni-upper-control-arm","title":"Camburg Ford Raptor '17-18 FOX 3.0 Factory DSC Kit (UNI Upper Control Arm)","description":"Experience unmatched off-road performance with the Camburg FOX 3.0 Factory DSC Kit. Crafted for durability and precision, this kit delivers exceptional suspension control on diverse terrains. The included FOX 3.0 Factory DSC shocks offer advanced damping technology, ensuring a smooth and controlled ride. Elevate your driving experience with the Camburg FOX 3.0 Factory DSC Kit, designed to tackle rugged landscapes with confidence and precision. Upgrade your suspension for ultimate off-road capabilities.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863183568945,"sku":"CBG110142-U","price":8858.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110142-U.jpg?v=1765390674"},{"product_id":"camburg-ford-f-150-4wd-09-13-fox-2-00-trail-series-kit","title":"Camburg Ford F-150 4wd '09-13 FOX 2.00\" Trail Series Kit","description":"The Camburg FOX 2.0 Trail Series kit is a suspension system for the Ford F-150. It includes FOX 2.0 Performance Series IFP Coilovers for 0-2 inches of lift and increased wheel travel. The shocks have a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, and a 5\/8\" hard chrome plated heat treated alloy steel shaft. They also have an internal reservoir design to separate shock oil from high-pressure nitrogen. The kit also includes uniball upper arms that replace the stock ball-joint for increased wheel travel and improved performance. The arms have more caster and a changed camber curve for correct alignment and better driving characteristics. In the rear, the kit includes FOX 2.0 Performance Series shocks with a larger aluminum shock body for better offroad performance. Note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. Aftermarket wheels with the correct offset are recommended for optimum performance and fit. The kit provides improved ride and handling, easy bolt-on installation, and is made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863183765553,"sku":"CBG110150-UC","price":2718.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110150-UC.jpg?v=1765390690"},{"product_id":"camburg-ford-f-150-2wd-09-13-fox-2-00-trail-series-kit","title":"Camburg Ford F-150 2wd '09-13 FOX 2.00\" Trail Series Kit","description":"The Camburg FOX 2.0 Trail Series kit is a suspension system for the Ford F-150. It includes FOX 2.0 Performance Series IFP Coilovers for 0-2 inches of lift and increased wheel travel. The shocks have a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, and a 5\/8\" hard chrome plated heat treated alloy steel shaft. They also have an internal reservoir design to separate shock oil from high-pressure nitrogen. The kit also includes uniball upper arms that replace the stock ball-joint for increased wheel travel and improved performance. The arms have more caster and a changed camber curve for correct alignment and better driving characteristics. In the rear, the kit includes FOX 2.0 Performance Series shocks with a larger aluminum shock body for better offroad performance. Note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. Aftermarket wheels with the correct offset are recommended for optimum performance and fit. The kit provides improved ride and handling, easy bolt-on installation, and is made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863183831089,"sku":"CBG110151-UC","price":2718.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110151-UC.jpg?v=1765390697"},{"product_id":"camburg-ford-f-150-4wd-04-08-fox-2-00-trail-series-kit","title":"Camburg Ford F-150 4wd 04-08 FOX 2.00\" Trail Series Kit","description":"The Camburg FOX 2.0 Trail Series kit is a suspension system for the Ford F-150 4WD. It includes FOX 2.0 Performance Series IFP Coilovers for 0-2 inches of lift and increased wheel travel. The shocks have a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, and a 5\/8\" hard chrome plated heat treated alloy steel shaft. They also have an internal reservoir design to separate shock oil from high-pressure nitrogen. The kit also includes uniball upper arms that replace the stock ball-joint for increased wheel travel and improved performance. The arms have more caster and a changed camber curve for correct alignment and better driving characteristics. In the rear, the kit includes FOX 2.0 Performance Series shocks with a larger aluminum shock body for better offroad performance. Note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. Aftermarket wheels with the correct offset are recommended for optimum performance and fit. The kit provides improved ride and handling, easy bolt-on installation, and is made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863183929393,"sku":"CBG110152-U","price":2698.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110152-U.jpg?v=1765390706"},{"product_id":"camburg-ford-f-150-2wd-04-08-fox-2-00-trail-series-kit","title":"Camburg Ford F-150 2wd 04-08 FOX 2.00\" Trail Series Kit","description":"The Camburg FOX 2.0 Trail Series kit is a suspension system for the Ford F-150 RWD. It includes FOX 2.0 Performance Series IFP Coilovers for 0-2 inches of lift and increased wheel travel. The shocks have a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, and a 5\/8\" hard chrome plated heat treated alloy steel shaft. They also have an internal reservoir design to separate shock oil from high-pressure nitrogen. The kit also includes uniball upper arms that replace the stock ball-joint for increased wheel travel and improved performance. The arms have more caster and a changed camber curve for correct alignment and better driving characteristics. In the rear, the kit includes FOX 2.0 Performance Series shocks with a larger aluminum shock body for better offroad performance. Note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. Aftermarket wheels with the correct offset are recommended for optimum performance and fit. The kit provides improved ride and handling, easy bolt-on installation, and is made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863183994929,"sku":"CBG110153-U","price":2538.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110153-U.jpg?v=1765390714"},{"product_id":"kinetik-performance-lift-kit-w-fox-2-50-factory-dsc","title":"KINETIK Performance Lift Kit w\/ FOX 2.50\" Factory DSC","description":"Our FOX 2.5 Factory DSC kit is a high-performance suspension upgrade for the Ford F-150. It includes FOX's 2.5 Factory Series front coilovers with DSC compression adjusters, which provide precise tuning and improved handling. The kit also features remote external reservoirs for lower operating temperatures and increased oil capacity. The shocks increase wheel travel and are designed for both on-road and off-road use. To address limitations in the stock upper arms, our kit includes upper arms that improve suspension performance. You can choose between tubular and billet uniball arms based on your budget and usage. These arms increase wheel travel, correct suspension geometry, and improve driving characteristics. In the rear, the kit includes FOX's 2.5 Factory Series DSC remote res. shocks, which offer increased oil capacity and better control and damping. These shocks also have DSC adjusters for low and high-speed compression tuning. They increase rear wheel travel and articulation, and are compatible with stock or Deaver leaf springs.Please note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. We recommend aftermarket wheels with the correct offset for optimal performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184093233,"sku":"CBG110155-K","price":5864.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110155-K.jpg?v=1765390722"},{"product_id":"performance-lift-kit-w-fox-2-50-factory-dsc","title":"Performance Lift Kit w\/ FOX 2.50\" Factory DSC","description":"Our FOX 2.5 Factory DSC kit is a high-performance suspension upgrade for the Ford F-150. It includes FOX's 2.5 Factory Series front coilovers with DSC compression adjusters, which provide precise tuning and improved handling. The kit also features remote external reservoirs for lower operating temperatures and increased oil capacity. The shocks increase wheel travel and are designed for both on-road and off-road use. To address limitations in the stock upper arms, our kit includes upper arms that improve suspension performance. You can choose between tubular and billet uniball arms based on your budget and usage. These arms increase wheel travel, correct suspension geometry, and improve driving characteristics. In the rear, the kit includes FOX's 2.5 Factory Series DSC remote res. shocks, which offer increased oil capacity and better control and damping. These shocks also have DSC adjusters for low and high-speed compression tuning. They increase rear wheel travel and are compatible with stock or Deaver leaf springs for maximum performance. Please note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. We recommend aftermarket wheels with the correct offset for optimal performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184158769,"sku":"CBG110155-UC","price":5184.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110155-UC.jpg?v=1765390729"},{"product_id":"kinetik-performance-lift-kit-w-bilstein-6112","title":"KINETIK Performance Lift Kit w\/ Bilstein 6112","description":"Elevate your suspension with the Camburg Bilstein 6112 Performance Kit featuring a billet upper control arm. Crafted for durability and performance, this kit provides a reliable solution for optimizing your suspension setup. The included Bilstein 6112 shocks offer improved control and responsiveness, ensuring smoother rides on and off-road. With the billet upper control arm, you gain enhanced strength and precision. Elevate your driving experience with the Camburg Bilstein 6112 Performance Kit, designed to conquer diverse terrains with confidence and precision. Upgrade your suspension setup for maximum performance and driving comfort.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184257073,"sku":"CBG110161-K","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110161-K.jpg?v=1765390736"},{"product_id":"camburg-ford-f-150-4wd-09-13-bilstein-6112-performance-kit","title":"Camburg Ford F-150 4wd 09-13 Bilstein 6112 Performance Kit","description":"With Bilstein’s 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their F-150, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit gives you that and more with our 1.25\" uniball upper arms that allow for more wheel travel and improve the geometry for better handling and alignment specs. Our arms increase caster and correct the camber curve compared to the stock arms. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry Improved ride on and off-road 100% Bolt-on Made in the USA We combine these with Bilstein’s 5100 rear shocks that gain more wheel travel and improve the ride for everyday driving. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry 100% Bolt-on Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184322609,"sku":"CBG110161-UC","price":2120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110161-UC.jpg?v=1765390744"},{"product_id":"kinetik-performance-lift-kit-w-king-2-50","title":"KINETIK Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 includes Kings’s 2.5 series front coilovers with compression adjusters, improving ride and handling on and off-road. The kit also includes upper arms that increase wheel travel, correct suspension geometry, and eliminate weak upper ball-joints. The rear features King’s 2.5 remote res. shocks with increased oil capacity and compression adjusters for tuning. The kit is designed for use with stock or Deaver leaf springs. Note: factory 20\" wheels may require a wheel spacer and aftermarket wheels are recommended for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184420913,"sku":"CBG110162-K","price":5481.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110162-K.jpg?v=1765390752"},{"product_id":"performance-lift-kit-w-king-2-50","title":"Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 includes Kings’s 2.5 series front coilovers with compression adjusters, improving ride and handling on and off-road. The kit also includes upper arms that increase wheel travel, correct suspension geometry, and eliminate weak upper ball-joints. The rear features King’s 2.5 remote res. shocks with increased oil capacity and compression adjusters for tuning. The kit is designed for use with stock or Deaver leaf springs. Note: factory 20\" wheels may require a wheel spacer or aftermarket wheels with correct offset for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184519217,"sku":"CBG110162-UC","price":4801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110162-UC.jpg?v=1765390759"},{"product_id":"kinetik-performance-lift-kit-w-bilstein-6113","title":"KINETIK Performance Lift Kit w\/ Bilstein 6112","description":"Elevate your suspension with the Camburg Bilstein 6112 Performance Kit featuring a billet upper control arm. Crafted for durability and performance, this kit provides a reliable solution for optimizing your suspension setup. The included Bilstein 6112 shocks offer improved control and responsiveness, ensuring smoother rides on and off-road. With the billet upper control arm, you gain enhanced strength and precision. Elevate your driving experience with the Camburg Bilstein 6112 Performance Kit, designed to conquer diverse terrains with confidence and precision. Upgrade your suspension setup for maximum performance and driving comfort.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184584753,"sku":"CBG110167-K","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110167-K.jpg?v=1765390766"},{"product_id":"camburg-ford-f-150-4wd-04-08-bilstein-6112-performance-kit","title":"Camburg Ford F-150 4wd 04-08 Bilstein 6112 Performance Kit","description":"With Bilstein’s 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their F-150, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our uniball upper arms address these issues and more.  Replacing the stock ball-joint with a uni-ball bearing, we can increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry Improved ride on and off-road 100% Bolt-on Made in the USA We combine these with Bilstein’s 5100 rear shocks that gain more wheel travel and improve the ride for everyday driving. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. 0-2\" lift (front) Improved ride and handling Easy bolt-on installation Made in the USA Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184683057,"sku":"CBG110167-U","price":2100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110167-U.jpg?v=1765390773"},{"product_id":"kinetik-performance-lift-kit-w-bilstein-6114","title":"KINETIK Performance Lift Kit w\/ Bilstein 6112","description":"Elevate your suspension with the Camburg Bilstein 6112 Performance Kit featuring a billet upper control arm. Crafted for durability and performance, this kit provides a reliable solution for optimizing your suspension setup. The included Bilstein 6112 shocks offer improved control and responsiveness, ensuring smoother rides on and off-road. With the billet upper control arm, you gain enhanced strength and precision. Elevate your driving experience with the Camburg Bilstein 6112 Performance Kit, designed to conquer diverse terrains with confidence and precision. Upgrade your suspension setup for maximum performance and driving comfort.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184748593,"sku":"CBG110168-K","price":2410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110168-K.jpg?v=1765390780"},{"product_id":"camburg-ford-f-150-2wd-04-08-bilstein-6112-performance-kit","title":"Camburg Ford F-150 2wd 04-08 Bilstein 6112 Performance Kit","description":"With Bilstein’s 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their F-150, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our uniball upper arms address these issues and more.  Replacing the stock ball-joint with a uni-ball bearing, we can increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry Improved ride on and off-road 100% Bolt-on Made in the USA We combine these with Bilstein’s 5100 rear shocks that gain more wheel travel and improve the ride for everyday driving. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. 0-2\" lift (front) Improved ride and handling Easy bolt-on installation Made in the USA Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184846897,"sku":"CBG110168-U","price":1710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110168-U.jpg?v=1765390788"},{"product_id":"kinetik-performance-lift-kit-w-king-2-51","title":"KINETIK Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863184945201,"sku":"CBG110169-K","price":5481.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110169-K.jpg?v=1765390796"},{"product_id":"camburg-ford-f-150-4wd-04-08-king-2-5-performance-kit-tubular-uniball-series","title":"Camburg Ford F-150 4wd 04-08 King 2.5 Performance Kit - Tubular Uniball Series","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863185010737,"sku":"CBG110169-U","price":4781.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110169-U.jpg?v=1765390803"},{"product_id":"kinetik-performance-lift-kit-w-king-2-52","title":"KINETIK Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863185109041,"sku":"CBG110170-K","price":4738.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110170-K.jpg?v=1765390810"},{"product_id":"camburg-ford-f-150-2wd-04-08-king-2-5-performance-kit-tubular-uniball-series","title":"Camburg Ford F-150 2wd 04-08 King 2.5 Performance Kit - Tubular Uniball Series","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863185174577,"sku":"CBG110170-U","price":4038.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110170-U.jpg?v=1765390819"},{"product_id":"camburg-ford-raptor-17-20-king-3-0-ibp-performance-kit-2017-2018-raptor","title":"Camburg Ford Raptor 17-20 King 3.0 IBP Performance Kit - 2017-2018 Raptor","description":"Our King 3.0 Performance kit for the Ford Raptor takes it to the next level. We utilize Kings’s 3.0 series internal bypass front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel and correct geometry. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. In the rear we go with a pair of King’s 3.0 bypass shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The bypass adjusters allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. Since they are longer in length they increase rear wheel travel and articulation. The bypass shocks have a lot more bottoming control for the bigger hits off-road. 2019-2020 models requires the Damper Interface Module installed. When using the factory OEM 17\" wheel or positive offset wheel, you may need a 1\/4\" – 3\/8\" wheel spacer when running larger 37\" or wider tires than stock. We recommend a zero offset wheel.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863185567793,"sku":"CBG110174-K","price":9502.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110174-K.jpg?v=1765390855"},{"product_id":"camburg-ford-raptor-17-18-king-3-0-ibp-performance-kit-uni-upper-control-arm","title":"Camburg Ford Raptor '17-18 King 3.0 IBP Performance Kit (UNI Upper Control Arm)","description":"Elevate your off-road adventures with the Camburg King 3.0 IBP Performance Kit. Crafted for durability and precision, this kit enhances your suspension setup to provide exceptional handling across various terrains. The King 3.0 Internal Bypass shocks incorporate advanced damping technology for a controlled and smooth ride, even on rugged trails. Upgrade your suspension system with the Camburg King 3.0 IBP Performance Kit, meticulously designed to tackle challenging terrains with confidence. Unleash the full potential of your off-road experience and conquer the trails with unmatched performance.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863185633329,"sku":"CBG110174-U","price":8702.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110174-U.jpg?v=1765390862"},{"product_id":"camburg-ford-raptor-19-20-fox-3-0-live-valve-performance-kit","title":"Camburg Ford Raptor 19-20 FOX 3.0 Live Valve Performance Kit","description":"Our FOX 3.0 Performance kit for the Ford Raptor takes it to the next level. We utilize FOX's 3.0 series Live Valve internal bypass front coilovers. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel and correct geometry. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. In the rear we go with a pair of FOX's 3.0 series Live Valve internal bypass shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. Since they are longer in length they increase rear wheel travel and articulation. The bypass shocks have a lot more bottoming control for the bigger hits off-road. 0-2\" lift (front) Corrected geometry with upper arms Improved handling on and off-road Made in the USA When using the factory OEM 17\" wheel or positive offset wheel, you may need a 1\/4\" – 3\/8\" wheel spacer when running larger 37\" or wider tires than stock. We recommend a zero offset wheel.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863186649137,"sku":"CBG110185-K","price":10194.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110185-K.jpg?v=1765390942"},{"product_id":"camburg-ford-ranger-2wd-4wd-19-23-fox-2-00-trail-series-kit","title":"Camburg Ford Ranger 2wd\/4wd 19-23 FOX 2.00\" Trail Series Kit","description":"Introducing the Camburg FOX 2.0 Trail Series kit for Ford Ranger. This suspension system utilizes FOX's 2.0 series shocks, providing 0-3 inches of lift and increased wheel travel. The shocks feature a durable construction with a clear coated alloy body, billet aluminum components, and a heat-treated alloy steel shaft. They deliver race-winning performance as a direct replacement bolt-on shock. To maximize suspension travel and performance, our kit includes uniball upper arms that replace the stock ball-joint. These arms increase wheel travel, offer greater strength, and improved durability under extreme conditions. They also feature enhanced caster and camber curve for correct alignment and improved driving characteristics. In the rear, we provide FOX's 2.0 Performance Series shocks with a larger aluminum shock body for better off-road performance and a firmer ride. Tremor models will see an additional 1-1.5 inches of lift, as they are already lifted from the factory. Our suspension system is designed for easy bolt-on installation and is proudly made in the USA. Please note that the kit is compatible with US model trucks only.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863186812977,"sku":"CBG110188-UC","price":2718.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110188-UC.jpg?v=1765390957"},{"product_id":"kinetik-performance-lift-kit-w-fox-2-50-factory-elite-dsc","title":"KINETIK Performance Lift Kit w\/ FOX 2.50\" Factory Elite DSC","description":"The Camburg FOX 2.5 Performance Elite DSC Series kit is a high-performance suspension system for the Ford Ranger. It includes FOX's 2.5 series shocks and uniball upper arms. These coil-over kits provide improved ride quality and the ability to lift your vehicle for off-road use. The shocks have a 2.5\" diameter body for increased oil capacity and are fully rebuildable and revalveable. The remote external reservoirs help lower operating temperatures, and the Dual Speed Compression (DSC) adjuster allows for precise tuning with twelve low-speed and ten high-speed compression levels. The integrated coil spring is adjustable for preload and ride height. The upper arms are designed to increase wheel travel, improve geometry, and enhance driving characteristics. In the rear, the kit includes FOX's 2.5 Performance Elite DSC remote reservoir shocks for increased control and damping. These shocks are compatible with stock or Deaver leaf springs. Tremor models will see a lift of 1-1.5\". The kit is made in the USA and is compatible with US model trucks only.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863186878513,"sku":"CBG110189-K","price":5674.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110189-K.jpg?v=1765390964"},{"product_id":"performance-lift-kit-w-fox-2-50-factory-elite-dsc","title":"Performance Lift Kit w\/ FOX 2.50\" Factory Elite DSC","description":"The Camburg FOX 2.5 Performance Elite DSC Series kit is a high-performance suspension system for the Ford Ranger. It includes FOX's 2.5 series shocks and uniball upper arms. These coil-over kits provide improved ride quality and the ability to lift your vehicle for off-road use. The shocks have a 2.5\" diameter body for increased oil capacity and are fully rebuildable and revalveable. The remote external reservoirs help lower operating temperatures, and the Dual Speed Compression (DSC) adjuster allows for precise tuning with twelve low-speed and ten high-speed compression levels. The integrated coil spring is adjustable for preload and ride height. The upper arms are designed to increase wheel travel, improve geometry, and enhance driving characteristics. In the rear, the kit includes FOX's 2.5 Performance Elite DSC remote reservoir shocks for increased control and damping. These shocks are compatible with stock or Deaver leaf springs. Tremor models will see a lift of 1-1.5\". The kit is made in the USA and is compatible with US model trucks only.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863186976817,"sku":"CBG110189-UC","price":5094.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110189-UC.jpg?v=1765390971"},{"product_id":"kinetik-performance-lift-kit-w-king-2-53","title":"KINETIK Performance Lift Kit w\/ King 2.50\"","description":"Introducing our King 2.5 Performance kit for the new Ford Ranger. This kit includes a cast steel knuckle\/spindle, upper arms, and King's 2.5 series front coilovers with compression adjusters. It improves ride and handling on and off-road, increases wheel travel, corrects suspension geometry, and eliminates weak upper ball-joints. The kit also includes King's 2.5 remote res. shocks for the rear, offering increased oil capacity and control. Tremor models will see a lift of 1-1.5\". Made in the USA. Available for US model trucks only.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187042353,"sku":"CBG110190-K","price":5381.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110190-K.jpg?v=1765390979"},{"product_id":"performance-lift-kit-w-king-2-51","title":"Performance Lift Kit w\/ King 2.50\"","description":"Introducing our King 2.5 Performance kit for the new Ford Ranger. This kit includes a cast steel knuckle\/spindle, upper arms, and King's 2.5 series front coilovers with compression adjusters. It improves ride and handling on and off-road, increases wheel travel, corrects suspension geometry, and eliminates weak upper ball-joints. The kit also includes King's 2.5 remote res. shocks for the rear, offering increased oil capacity and control. Tremor models will see a lift of 1-1.5\". Made in the USA. Available for US model trucks only.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187140657,"sku":"CBG110190-UC","price":4801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110190-UC.jpg?v=1765390986"},{"product_id":"kinetik-performance-lift-kit-w-bilstein-6115","title":"KINETIK Performance Lift Kit w\/ Bilstein 6112","description":"Elevate your suspension with the Camburg Bilstein 6112 Performance Kit featuring a billet upper control arm. Crafted for durability and performance, this kit provides a reliable solution for optimizing your suspension setup. The included Bilstein 6112 shocks offer improved control and responsiveness, ensuring smoother rides on and off-road. With the billet upper control arm, you gain enhanced strength and precision. Elevate your driving experience with the Camburg Bilstein 6112 Performance Kit, designed to conquer diverse terrains with confidence and precision. Upgrade your suspension setup for maximum performance and driving comfort.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187206193,"sku":"CBG110191-K","price":2673.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110191-K.jpg?v=1765390994"},{"product_id":"camburg-ford-f-150-2wd-09-13-bilstein-6112-performance-kit","title":"Camburg Ford F-150 2wd 09-13 Bilstein 6112 Performance Kit","description":"With Bilstein’s 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their F-150, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit gives you that and more with our 1.25\" uniball upper arms that allow for more wheel travel and improve the geometry for better handling and alignment specs. Our arms increase caster and correct the camber curve compared to the stock arms. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry Improved ride on and off-road 100% Bolt-on Made in the USA We combine these with Bilstein’s 5100 rear shocks that gain more wheel travel and improve the ride for everyday driving. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry 100% Bolt-on Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187304497,"sku":"CBG110191-UC","price":1993.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110191-UC.jpg?v=1765391003"},{"product_id":"camburg-ford-f-150-4wd-14-20-fox-2-00-trail-series-kit","title":"Camburg Ford F-150 4wd 14-20 FOX 2.00\" Trail Series Kit","description":"The Camburg FOX 2.0 Trail Series kit is a suspension system for the Ford F-150 that includes FOX 2.0 Performance Series IFP Coilovers for improved performance and increased wheel travel. The shocks feature a durable alloy body, billet aluminum components, and a heat-treated alloy steel shaft. The kit also includes uniball upper arms that replace the stock ball-joint for increased strength and improved alignment. In the rear, there are FOX 2.0 Performance Series shocks with a larger shock body for better off-road performance. It is important to note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. Aftermarket wheels with the correct offset are recommended for optimal performance and fit. The kit provides a 0-2\" lift, improved ride and handling, and is made in the USA.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187402801,"sku":"CBG110192-UC","price":2718.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110192-UC.jpg?v=1765391010"},{"product_id":"kinetik-performance-lift-kit-w-bilstein-6116","title":"KINETIK Performance Lift Kit w\/ Bilstein 6112","description":"Elevate your suspension with the Camburg Bilstein 6112 Performance Kit featuring a billet upper control arm. Crafted for durability and performance, this kit provides a reliable solution for optimizing your suspension setup. The included Bilstein 6112 shocks offer improved control and responsiveness, ensuring smoother rides on and off-road. With the billet upper control arm, you gain enhanced strength and precision. Elevate your driving experience with the Camburg Bilstein 6112 Performance Kit, designed to conquer diverse terrains with confidence and precision. Upgrade your suspension setup for maximum performance and driving comfort.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187468337,"sku":"CBG110193-K","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110193-K.jpg?v=1765391018"},{"product_id":"camburg-ford-f-150-4wd-15-20-bilstein-6112-performance-kit","title":"Camburg Ford F-150 4wd 15-20 Bilstein 6112 Performance Kit","description":"With Bilstein’s NEW 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their F-150, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit gives you that and more with our 1.25\" uniball upper arms that allow for more wheel travel and improve the geometry for better handling and alignment specs. Our arms increase caster and correct the camber curve compared to the stock arms. We combine these with Bilstein’s 5100 rear shocks that gain more wheel travel and improve the ride for everyday driving. Adjustable shocks for 0-2\" of lift Increased wheel travel Corrected suspension geometry 100% Bolt On. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit. 0-2\" lift Improved ride and handling Made in the USA Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187566641,"sku":"CBG110193-UC","price":2120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110193-UC.jpg?v=1765391026"},{"product_id":"kinetik-performance-lift-kit-w-bilstein-6117","title":"KINETIK Performance Lift Kit w\/ Bilstein 6112","description":"Elevate your suspension with the Camburg Bilstein 6112 Performance Kit featuring a billet upper control arm. Crafted for durability and performance, this kit provides a reliable solution for optimizing your suspension setup. The included Bilstein 6112 shocks offer improved control and responsiveness, ensuring smoother rides on and off-road. With the billet upper control arm, you gain enhanced strength and precision. Elevate your driving experience with the Camburg Bilstein 6112 Performance Kit, designed to conquer diverse terrains with confidence and precision. Upgrade your suspension setup for maximum performance and driving comfort.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187664945,"sku":"CBG110194-K","price":2803.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110194-K.jpg?v=1765391033"},{"product_id":"kinetik-performance-lift-kit-w-fox-2-50-factory-dsc-1","title":"KINETIK Performance Lift Kit w\/ FOX 2.50\" Factory DSC","description":"Our FOX 2.5 Factory DSC kit is a high-performance suspension upgrade for the Ford F-150. It includes FOX's 2.5 Factory Series front coilovers with DSC compression adjusters, which provide precise tuning and improved handling. The kit also features remote external reservoirs for lower operating temperatures and increased oil capacity. The shocks increase wheel travel and are designed for both on-road and off-road use. To address limitations in the stock upper arms, our kit includes upper arms that improve suspension performance. You can choose between tubular and billet uniball arms based on your budget and usage. These arms increase wheel travel, correct suspension geometry, and improve driving characteristics. In the rear, the kit includes FOX's 2.5 Factory Series DSC remote res. shocks, which offer increased oil capacity and better control and damping. These shocks also have DSC adjusters for low and high-speed compression tuning. They increase rear wheel travel and articulation, and are compatible with stock or Deaver leaf springs.Please note that factory 20\" wheels may not clear the upper arm and may require a wheel spacer. We recommend aftermarket wheels with the correct offset for optimal performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187763249,"sku":"CBG110195-K","price":6194.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110195-K.jpg?v=1765391040"},{"product_id":"performance-lift-kit-w-fox-2-50-factory-dsc-1","title":"Performance Lift Kit w\/ FOX 2.50\" Factory DSC","description":"Our FOX 2.5 Factory DSC kit is a high-performance suspension upgrade for the Ford F-150. It includes FOX's 2.5 Factory Series front coilovers with DSC compression adjusters, which provide precise tuning and improved handling. The kit also features remote external reservoirs for lower operating temperatures and increased oil capacity. The upper arms in the kit address limitations of stock arms, improving wheel travel and correcting suspension geometry. In the rear, the kit includes FOX's 2.5 Factory Series DSC remote res. shocks, which offer increased control and damping. These shocks are designed to be used with stock or Deaver leaf springs for maximum wheel travel. Please note that factory 20\" wheels may require a wheel spacer or aftermarket wheels with the correct offset for optimal fit and performance.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863187927089,"sku":"CBG110195-UC","price":5514.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110195-UC.jpg?v=1765391048"},{"product_id":"kinetik-performance-lift-kit-w-king-2-54","title":"KINETIK Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863188025393,"sku":"CBG110196-K","price":5481.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110196-K.jpg?v=1765391055"},{"product_id":"performance-lift-kit-w-king-2-52","title":"Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863188123697,"sku":"CBG110196-UC","price":4801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110196-UC.jpg?v=1765391064"},{"product_id":"kinetik-performance-lift-kit-w-king-2-55","title":"KINETIK Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863188189233,"sku":"CBG110197-K","price":5481.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110197-K.jpg?v=1765391071"},{"product_id":"performance-lift-kit-w-king-2-53","title":"Performance Lift Kit w\/ King 2.50\"","description":"Our King 2.5 Performance kit for the Ford F-150 takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. Note: factory 20\" wheels will not clear the upper arm and may require a wheel spacer. We highly recommend aftermarket wheels with the correct offset with all our Ford kits for optimum performance and fit.","brand":"Camburg","offers":[{"title":"Default Title","offer_id":40863188287537,"sku":"CBG110197-UC","price":4801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2597\/3112\/files\/CAM-110197-UC.jpg?v=1765391079"}],"url":"https:\/\/www.shocksurplus.com\/collections\/suspension-lift-kit.oembed","provider":"Shock Surplus","version":"1.0","type":"link"}