6112 Assembled Front Coilovers
Estimated Delivery in 3-4 weeks
6112 Assembled Front Coilovers
Estimated Delivery in 3-4 weeks
Found it cheaper? We'll match it.
| Part Number | Position | Lift Height | Quantity |
|---|---|---|---|
| 47-333246 | Front | 1-2.5" | 1 |
This Shock Surplus assembled Bilstein B8 6112 front pair combines Bilstein's large-body 6112 dampers and matched coil springs into a ready-to-install package. Pre-assembly removes the need to transfer or compress the front springs during installation, making the upgrade more convenient while retaining Bilstein's vehicle-specific damping and spring tuning.
The 60 mm monotube design provides strong body control and consistent performance for daily driving, overlanding, and off-road use. Each selectable configuration is built around the same 6112 platform, allowing customers to choose the vehicle and spring-seat setup that best matches their application.
| Year | Make | Model | Drive | Position | Lift |
| 2026 | Toyota | Tacoma | 4WD & RWD | Front | 1-2.5" |
| 2025 | Toyota | Tacoma | 4WD & RWD | Front | 1-2.5" |
| 2024 | Toyota | Tacoma | 4WD & RWD | Front | 1-2.5" |
Shock Surplus handles Bilstein's warranty claims; if you encounter a product defect please submit a warranty claim.
View Bilstein Warranty Information
For more information: View the Shock Surplus Warranty Policy.
Shipping Info
Free Shipping on most orders to the lower 48 U.S. states. Truck freight items (over 100 lbs) and custom orders require a separate shipping quote.
- Applies to items like axles, leaf springs, and long-travel kits.
- No international shipping on freight items — only to U.S.-based freight forwarders.
- Worldwide shipping available: Canada, Europe, UAE, Australia, and most of Asia.
Contact us for an international shipping quote.
Returns & Exchanges
30-Day Return Policy — Items must be new, unused, uninstalled, and include all original hardware.
- No restocking fees for exchanges or gift card credit.
- 10% restocking fee on refunds, returns cost us real money, so the 10% helps keep the lights on.
- Installed, damaged, or dirty parts cannot be returned.
- Any returns missing hardware or miscellaneous items, the return will be denied and returned to the buyer at the buyer's expense.
Return Shipping Responsibility
CHECKOUT+ Package and Order Protection plan provides prepaid return labels for any returned packages, this fee varies by product.
- Our mistake (misboxed, wrong item, damaged): We cover the cost of return shipping.
- Buyer mistake (wrong item ordered, fitment error, changed mind): Return shipping is the buyer's responsibility - unless CHECKOUT+ Package Protection has been purchased.
- Under 50 lbs: Discounted carrier rate
- Over 50 lbs: Discounted carrier rate + $25 oversize fee
Refunds
Refunds are issued within 5–7 business days of receiving your return.
- Funds typically post to your account in 1–3 business days depending on your payment method.
- There is a 10% restocking fee on all refunds. We don’t get our original shipping, labor, or transaction fees back — so the 10% restocking fee keeps the lights on.
- You will receive an email once your refund is processed.
International Orders
- All international orders are final sale.
- Returns via freight forwarders only accepted if the product hasn’t left the U.S.
- Import taxes, duties, and other possible import-related fees are the buyer’s responsibility and not included in our shipping charges.
- We are not responsible for goods once exported outside the U.S.
Why Shock Surplus
1,000,000+ Shocks Shipped
The Premier Suspension Specialists
Authorized Dealer
Brand New - Warranty Backed
Free Shipping
Orders Over $175 - Lower 48 States
30-Day Returns
Free Exchange on Qualified Orders
INFORMATION
The new Tacoma rides on a whole new frame, and Toyota split it down the middle underneath: most Double Cabs got a multi-link coil rear, while the SR, the SR5 XtraCab and the PreRunner kept leaf springs. The Tacoma leaves the dealer with the nose sitting low, the factory struts are tuned for pavement, and they're not ready for the 33s or 35s and bed rack you're about to add. The basic factory black shocks are comfortable, but not capable – while the red TRD tuned shocks are capable, but some of the most uncomfortable Tacoma shocks we've ever driven. These Bilstein 6112s level the front and take over the damping in one part: a 2.6-inch monotube with a 60mm digressive piston, carrying far more oil than the strut it replaces. On this truck, the rear suspension matters as much as the engine. Know which one you have before you pick a setting.
The Bilstein 6112 and matching 5100/6100 shocks will only work on the rear coil spring suspension
We take it one step further. The 6112 normally shows up as a box of loose parts: dampers, springs, spring seats, and circlips, with a note that says "spring compressor required." Bilstein's kit also reuses your factory upper mounts. We build them for you, at the height you choose, with new OE-spec upper mounts, so what shows up at your door is two finished coilovers ready to bolt in to your Tacoma, or save you a couple hours of labor at a shop.
How We Build Them
Every pair is built to order after you pick your drivetrain, engine, rear suspension and lift setting above. Here's what happens on our bench:
- Set the circlips. The 6112 body has a row of numbered grooves, and where the circlip sits decides your ride height. Bilstein uses the same groove on both sides of the 2024+ Tacoma, and gives each drivetrain, engine and rear suspension its own column. We build to the column you ordered.
- Seat the billet spring perch. The anodized aluminum spring seat sits on the circlip and carries the spring.
- Compress and install the Bilstein spring. We use a mounted, shop-grade strut compressor. This is the step that makes DIYers nervous, for good reason: a coil spring under load stores a lot of energy.
- Swap in a new OE-spec upper mount. Bilstein's kit is designed around pulling the mount off your factory strut. We put a fresh one on instead, so your truck's original struts stay whole.
- Torque, check, label. The top nut gets torqued to spec, each coilover is checked and marked driver or passenger, and the pair is boxed together.
Why Buy Them Assembled?
- No spring compressor. Rental "clamshell" compressors are the most dangerous tool most people will ever use in a driveway. You skip that part entirely.
- No mismatched sides. A common 6112 mistake is setting the two sides one groove apart by accident, which leaves the truck leaning. Ours are set and checked as a pair.
- New mounts included. The loose Bilstein kit reuses your factory upper mounts. Ours come with new ones.
- Faster install. Assembly is the slowest part of a coilover job. With that done, the job is removing two struts and bolting in two.
Bilstein doesn't approve every groove on every Tacoma, so we only build the settings in the dropdown. Every setting lifts the truck; there's no stock-height option. 4WD i-FORCE runs 1.0" to 2.5", the i-FORCE MAX hybrid 1.0" to 2.0", RWD with a coil rear 1.5" to 2.5", and RWD with a leaf rear 2.0" or 2.5".
How to choose: First, look under the back of your truck. A stack of leaf springs on each side of the axle means a leaf rear; a coil spring between the axle and the frame means a coil rear. If it's a 4WD with leaf springs, stop and call us: this kit isn't built for it. Then measure from the center of each wheel to the fender lip, front and rear. The difference is your rake. Pick the setting for your column closest to that number, and add any rear lift you plan to run. Heavy bumper or winch going on? Go one setting up. Stuck between two? Call us with your measurements: (213) 433-3616.
Matching the Rear: Bilstein 5100 or 5160?
The 4th-gen Tacoma keeps a solid rear axle, but on two kinds of springs: multi-link coils on most Double Cabs, leaf packs on the SR, the SR5 XtraCab and the PreRunner. Rear height comes from the springs; the shock just has to cover the height you run. Bilstein's rear options depend on which rear you have.
The Bilstein 5100 (24-333214) is the default. It's a 46mm digressive monotube with a zinc-plated body, rated for stock height up to 1.5" of rear lift. It's the right call on the stock rear springs or a small rear lift.
The Bilstein 5160 (25-349697) is for RWD trucks with a leaf rear only. Its remote reservoir carries extra oil, so it holds up on long washboard and under a loaded bed, covering stock to 1.5" of rear lift. Bilstein doesn't build a 5160 for the coil-rear Tacoma. On a coil rear, the step up is the B8 6100 (24-333269), the rear half of Bilstein's 6112 / 6100 system, also for stock to 1.5" of rear lift.
Run the 5100 if:
- You're keeping the factory rear springs, or adding up to 1.5"
- The truck is a daily that sees dirt roads and the odd trail weekend
- You want Bilstein control at both ends for the least money
Run the 5160 or B8 6100 if:
RWD with a leaf rear: run the 5160 (25-349697). Coil rear: run the B8 6100 (24-333269).
- The bed carries real weight: a rack, a camper shell, a fridge and recovery gear
- You tow a small trailer or a pair of bikes on a regular basis
- You spend long stretches on washboard, where a shock without the extra oil heats up
When you need something else: More than 1.5" of rear lift, a TRD Pro or Trailhunter, or a 4WD with a leaf rear? Call us and we'll size the rear to your setup: (213) 433-3616.
Shop the Bilstein 5100 Rear Pair for the 2024-2026 Tacoma
Shop the Bilstein 6100 Rear Pair for the 2024-2026 Tacoma (coil rear)
Shop the Bilstein 5160 Rear Pair for the 2024-2026 Tacoma (RWD leaf rear)
On the Road
Bilstein tunes for control first. Next to the factory struts, the front stops dipping every time you touch the brakes, stays flatter through a freeway interchange, and settles a dip in one motion. The 6112 rides far more comfortably compared to the TRD tuned red reservoir shocks, and are also more capable offroad during spirited driving. That matters more once the truck carries a bumper, a rack and bigger tires. If you want the softest possible ride, this isn't it, and we'd rather tell you now than after the install.
Off the Road
The 2.6-inch body holds more oil than the factory strut and sheds heat better, so the front keeps the same control at the end of a long dirt road that it had at the start. The digressive piston stays firm on small, quick inputs and opens up on bigger hits. The extra height clears a bigger tire. The rear is its own job, and which shock fits depends on your springs (see above).
The Honest Trade-Offs
- Not for a 4WD with rear leaf springs. Bilstein excludes the 4WD leaf-rear Tacoma (the SR and the SR5 XtraCab 4x4) from 47-333246. Call us.
- Not for the TRD Pro or Trailhunter. Neither is on Bilstein's fitment notes for this kit. Both come with their own factory off-road shocks.
- Not for Adaptive Variable Suspension. Bilstein lists this kit for trucks without AVS.
- There's no stock-height setting. The lowest setting on any column lifts the truck at least 1.0", and RWD leaf-rear trucks start at 2.0".
- Your height is set when we build it. Changing it later means taking the coilover apart with a strut compressor. Measure before you order.
- Firmer than stock. See "On the Road" above.
- Built to order. Every pair is assembled for your truck, so it takes longer to ship than a box pulled off a shelf.
- The top settings change the alignment. At 2" and up, the factory upper control arms run steeper. If your shop can't bring camber back into spec, Bilstein B8 Pro upper control arms for the 2024-2026 Tacoma fix it.
- Don't stack a spacer on top. A strut spacer on top of a 6112 pushes the front past what the factory arms and axles are built for.
Install Notes
- Fits 2024-2026 Toyota Tacoma: 4WD with a coil rear (i-FORCE or i-FORCE MAX hybrid), and RWD i-FORCE with a coil or leaf rear. Choose your setup above; the height settings are different for each.
- 4WD with rear leaf springs: call us before ordering. Bilstein excludes it from this kit.
- TRD Pro and Trailhunter owners: call us before ordering. Neither is on Bilstein's fitment notes for this kit.
- Adaptive Variable Suspension (AVS): not compatible. Not sure what your truck has? Send us your VIN.
- Bilstein's instructions call for checking the headlights after the install, and recalibrating them if your truck has adaptive headlights.
- For a 2005-2023 Tacoma, see our 2005-2023 Tacoma assembled 6112 listing.
- Removing a strut spacer? Leave it off.
- Get an alignment right after install. Any lift changes camber and toe.
- Recheck the front height after the springs settle in over the first few hundred miles.
- Most people with a floor jack, jack stands, and a basic socket set can swap the pair in an afternoon. The heavy lifting is done.
Who Should Buy These
2024-2026 Tacoma owners that like to spend time in the dirt where these bigger-bore shocks really shine. Drivers and adventurers that really ask a lot from their truck, whether loaded down with gear, towing a trailer, or loading up the family on weekends to get into the wilderness will see a huge benefit to a more compliant and capable ride from these Bilstein 6112 dampers. A strong fit for TRD Sport and TRD Off-Road builds heading for dirt, and for PreRunner owners chasing a level stance.
VIDEO GALLERY
CUSTOMER REVIEWS
The Expert's Opinion
"Bilstein shocks aren't always the softest ride out there, but if you want precision handling, confidence at high speeds, and rock-solid stability under load, they're the best in the game.
They're built to perform. At Shock Surplus, we back every Bilstein we sell – because we know they won't let you down"
Questions? We've got answers
Bilstein shocks make your vehicle respond much better than stock shocks. Are they super soft and squishy on the road? No. They give you confidence because your truck or SUV reacts exactly how you expect when you steer or brake. That’s why we say 'Confidence through Control.' If you like having more control and a sportier feel while driving, Bilstein is the right choice. But if you want the same or more comfort than the soft factory shocks, we can recommend other options
Bilstein 5100 shocks can’t be adjusted for stiffness or rebound. But on some trucks and SUVs (like the Tacoma, F-150, or Tundra), they can adjust the front ride height. This lets you reuse your stock coil springs and still lift the front of your vehicle by up to 2.5 inches, depending on the model. Always check the product details for the exact fit on your vehicle
Click the 'Select Your Vehicle' button above the 'Add to Cart' button to make sure the shocks fit your exact vehicle. If needed, the site will send you to the right shocks for your ride. If your vehicle has been lifted, use the dropdown menu to pick the correct lift height. For example, if you have a Rough Country 6-inch lift kit, choose Front 4–6" and Rear 3–4" (the rear is usually smaller than the front). Still not sure? Our sales team is happy to help.
Bilstein shocks are one of the most durable and reliable shocks manufactured here in the USA. German engineering mixed with extreme abuse testing has resulted in a shock absorber that is designed to last 100,000 miles or more. We stand behind every Bilstein shock we sell and offer an expedited warranty process for any issues surrounding your purchase from Shock Surplus.
Product Details
Whether you want to upgrade, add a reservoir, or find something more affordable, contact us with any questions!
View full product specifications
View warranty coverage
Free shipping within the lower 48 United States