6112 Assembled Front Coilovers
Estimated Delivery in 3-4 weeks
6112 Assembled Front Coilovers
Estimated Delivery in 3-4 weeks
Found it cheaper? We'll match it.
| Part Number | Position | Lift Height | Quantity |
|---|---|---|---|
| 47-347472 | Front | 0-2.7" | 1 |
This Shock Surplus assembled Bilstein B8 6112 front pair combines Bilstein's large-body 6112 dampers and matched coil springs into a ready-to-install package. Pre-assembly removes the need to transfer or compress the front springs during installation, making the upgrade more convenient while retaining Bilstein's vehicle-specific damping and spring tuning.
The 60 mm monotube design provides strong body control and consistent performance for daily driving, overlanding, and off-road use. Each selectable configuration is built around the same 6112 platform, allowing customers to choose the vehicle and spring-seat setup that best matches their application.
| Year | Make | Model | Drive | Position | Lift |
| 2026 | Toyota | Land Cruiser 250 | 4WD | Front | 0-2.7" |
| 2025 | Toyota | Land Cruiser 250 | 4WD | Front | 0-2.7" |
| 2024 | Toyota | Land Cruiser 250 | 4WD | Front | 0-2.7" |
Shock Surplus handles Bilstein's warranty claims; if you encounter a product defect please submit a warranty claim.
View Bilstein Warranty Information
For more information: View the Shock Surplus Warranty Policy.
Shipping Info
Free Shipping on most orders to the lower 48 U.S. states. Truck freight items (over 100 lbs) and custom orders require a separate shipping quote.
- Applies to items like axles, leaf springs, and long-travel kits.
- No international shipping on freight items — only to U.S.-based freight forwarders.
- Worldwide shipping available: Canada, Europe, UAE, Australia, and most of Asia.
Contact us for an international shipping quote.
Returns & Exchanges
30-Day Return Policy — Items must be new, unused, uninstalled, and include all original hardware.
- No restocking fees for exchanges or gift card credit.
- 10% restocking fee on refunds, returns cost us real money, so the 10% helps keep the lights on.
- Installed, damaged, or dirty parts cannot be returned.
- Any returns missing hardware or miscellaneous items, the return will be denied and returned to the buyer at the buyer's expense.
Return Shipping Responsibility
CHECKOUT+ Package and Order Protection plan provides prepaid return labels for any returned packages, this fee varies by product.
- Our mistake (misboxed, wrong item, damaged): We cover the cost of return shipping.
- Buyer mistake (wrong item ordered, fitment error, changed mind): Return shipping is the buyer's responsibility - unless CHECKOUT+ Package Protection has been purchased.
- Under 50 lbs: Discounted carrier rate
- Over 50 lbs: Discounted carrier rate + $25 oversize fee
Refunds
Refunds are issued within 5–7 business days of receiving your return.
- Funds typically post to your account in 1–3 business days depending on your payment method.
- There is a 10% restocking fee on all refunds. We don’t get our original shipping, labor, or transaction fees back — so the 10% restocking fee keeps the lights on.
- You will receive an email once your refund is processed.
International Orders
- All international orders are final sale.
- Returns via freight forwarders only accepted if the product hasn’t left the U.S.
- Import taxes, duties, and other possible import-related fees are the buyer’s responsibility and not included in our shipping charges.
- We are not responsible for goods once exported outside the U.S.
Why Shock Surplus
1,000,000+ Shocks Shipped
The Premier Suspension Specialists
Authorized Dealer
Brand New - Warranty Backed
Free Shipping
Orders Over $175 - Lower 48 States
30-Day Returns
Free Exchange on Qualified Orders
INFORMATION
The Land Cruiser name is back in the US, and the people buying a 250 mostly plan to use it the way the name promises: long drives to remote places, loaded with a fridge, recovery gear and maybe a rooftop tent. The factory front struts are tuned for a quiet, composed ride empty. Add the weight of a real overland setup and the nose settles, and the damping that felt refined on pavement gets busy on a long corrugated road. These Bilstein 6112s give the 250 the clearance and control the trip needs: a 2.6-inch monotube body with a 60mm digressive piston, set anywhere from factory height to 2.75" of lift.
We do the assembly so you don't. Bilstein ships the 6112 as dampers, springs, spring seats and circlips with a "spring compressor required" note, and it expects you to reuse the factory upper mounts. We build the pair on our bench at the height you pick, with new OE-spec upper mounts, and send two finished coilovers to you or your shop.
How We Build Them
Your pair is built to order once you choose a height above. On our bench:
- Set the circlips. The 6112 body has a row of numbered grooves, and where the circlip sits decides your ride height. On the Land Cruiser 250, Bilstein uses the same groove on both sides. We set each coilover to the setting you ordered.
- Seat the billet spring perch. The anodized aluminum spring seat sits on the circlip and carries the spring.
- Compress and install the Bilstein spring. We use a mounted, shop-grade strut compressor. This is the step that makes DIYers nervous, for good reason: a coil spring under load stores a lot of energy.
- Fit a new OE-spec upper mount. Bilstein's kit reuses the factory mount, which means pulling apart a nearly new strut to get it. We fit a new mount instead and leave your factory assemblies whole.
- Torque, check, label. The top nut gets torqued to spec, each coilover is checked and marked driver or passenger, and the pair is boxed together.
Why Buy Them Assembled?
- No spring compressor. Rental "clamshell" compressors are the most dangerous tool most people will ever use in a driveway. You skip that part entirely.
- No mismatched sides. A common 6112 mistake is setting the two sides one groove apart by accident, which leaves the truck leaning. Ours are set and checked as a pair.
- New mounts included. The loose Bilstein kit reuses your factory upper mounts. Ours come with new ones.
- Faster install. Assembly is the slowest part of a coilover job. With that done, the job is removing two struts and bolting in two.
Bilstein doesn't approve every groove on the 250, so we only build the settings in the dropdown: factory height at #1, 0.7" at #2, then about 0.4" per groove up to 2.75" at #7.
How to choose: Measure from the center of each wheel to the fender lip, front and rear. The difference is your rake. To level the truck on the stock rear springs, pick the setting closest to that number. Planning taller rear springs for a full load? Add that rear lift. Carrying a steel bumper and winch up front? Call us before you pick; added weight changes where the truck settles. Stuck between two settings? Send us your measurements: (213) 433-3616.
Matching the Rear: Bilstein 5100 or 5160?
The Land Cruiser 250 uses a coil-sprung solid rear axle, so rear height comes from the coil springs. The rear shock just has to cover the height you run. Bilstein makes two rears for it: the 5100 and the B8 6100.
The Bilstein 5100 (24-347433) is the budget match. A 46mm digressive monotube, rated for up to 1.75" of rear lift. Fine for a truck that's mostly a daily driver with weekend trips.
Bilstein doesn't make a 5160 for the Land Cruiser 250. For an overland build, we'd go straight to the B8 6100 (24-347440). It's the rear half of Bilstein's 6112 / 6100 system, with a larger body that matches the front and handles heat better under a loaded rear.
Run the 5100 if:
- The truck runs near stock weight in the back
- Trips are weekends, not weeks
- You want Bilstein control front and rear for the least money
Run the B8 6100 if:
- The cargo area carries a drawer system, fridge or water full time
- You run long corrugated roads where a small shock body gets hot
- You want the rear to match the 6112 front
When you need something else: More than 1.75" of rear lift, heavy rear springs, or a GX550? Call us and we'll size the rear to your build: (213) 433-3616.
Shop the Bilstein 5100 Rear Pair for the 2024-2026 Land Cruiser 250
Shop the Bilstein 6100 Rear Pair for the 2024-2026 Land Cruiser 250
On the Road
The 250 stays a comfortable truck, just a more controlled one. Bilstein's valving keeps the nose flatter under braking and settles a highway dip in one motion. With the cargo area full, the front holds its posture instead of feeling heavy and slow. It's firmer than stock over sharp, small bumps, and that's the cost of the control.
Off the Road
This is where the 6112 earns it. The 2.6-inch body holds more oil than the factory strut, so damping stays consistent hour after hour on washboard instead of fading as it heats up. The digressive piston stays firm on small chatter and opens up on bigger hits, which keeps a loaded truck from bottoming. Set it at 2" or more and you have room for a bigger tire. Plan the rear at the same time (see above).
The Honest Trade-Offs
- Not for Adaptive Variable Suspension. Bilstein lists this kit for vehicles without AVS.
- Not for the Lexus GX550. It shares the platform, but it isn't on Bilstein's fitment for 47-347472.
- Your height is set when we build it. Changing it later means taking the coilover apart with a strut compressor. Measure before you order.
- Firmer than stock. See "On the Road" above.
- Built to order. Every pair is assembled for your truck, so it takes longer to ship than a box pulled off a shelf.
- The top settings change the alignment. Near 2.75", the factory upper control arms run at steeper angles. If your shop can't bring camber back into spec, aftermarket upper control arms fix it.
- Don't stack a spacer on top. A strut spacer on top of a 6112 pushes the front past what the factory arms and axles are built for.
Install Notes
- Fits 2024-2026 Toyota Land Cruiser 250 4WD: 1958, Land Cruiser and First Edition, all with the i-FORCE MAX hybrid.
- Adaptive Variable Suspension (AVS): not compatible. Not sure? Send us your VIN.
- Lexus GX550 owners: call us. It isn't on Bilstein's fitment for this kit.
- Bilstein's instructions call for recalibrating adaptive headlights after the install, if your truck has them.
- For a 2008-2021 Land Cruiser 200, see our Land Cruiser 200 assembled 6112 listing.
- Get an alignment right after install. Any lift changes camber and toe.
- Recheck the front height after the springs settle in over the first few hundred miles.
- Most people with a floor jack, jack stands, and a basic socket set can swap the pair in an afternoon. The heavy lifting is done.
Who Should Buy These
Land Cruiser 250 owners building for real trips: a fridge, a drawer system, a rooftop tent, long days on dirt. You want the clearance and a front end that stays composed under load, and you'd rather pay for the assembly than borrow a spring compressor. Also a good fit if you just want the rake gone and a better damper at factory height.
VIDEO GALLERY
CUSTOMER REVIEWS
The Expert's Opinion
"Bilstein shocks aren't always the softest ride out there, but if you want precision handling, confidence at high speeds, and rock-solid stability under load, they're the best in the game.
They're built to perform. At Shock Surplus, we back every Bilstein we sell – because we know they won't let you down"
Questions? We've got answers
Bilstein shocks make your vehicle respond much better than stock shocks. Are they super soft and squishy on the road? No. They give you confidence because your truck or SUV reacts exactly how you expect when you steer or brake. That’s why we say 'Confidence through Control.' If you like having more control and a sportier feel while driving, Bilstein is the right choice. But if you want the same or more comfort than the soft factory shocks, we can recommend other options
Bilstein 5100 shocks can’t be adjusted for stiffness or rebound. But on some trucks and SUVs (like the Tacoma, F-150, or Tundra), they can adjust the front ride height. This lets you reuse your stock coil springs and still lift the front of your vehicle by up to 2.5 inches, depending on the model. Always check the product details for the exact fit on your vehicle
Click the 'Select Your Vehicle' button above the 'Add to Cart' button to make sure the shocks fit your exact vehicle. If needed, the site will send you to the right shocks for your ride. If your vehicle has been lifted, use the dropdown menu to pick the correct lift height. For example, if you have a Rough Country 6-inch lift kit, choose Front 4–6" and Rear 3–4" (the rear is usually smaller than the front). Still not sure? Our sales team is happy to help.
Bilstein shocks are one of the most durable and reliable shocks manufactured here in the USA. German engineering mixed with extreme abuse testing has resulted in a shock absorber that is designed to last 100,000 miles or more. We stand behind every Bilstein shock we sell and offer an expedited warranty process for any issues surrounding your purchase from Shock Surplus.
Product Details
Whether you want to upgrade, add a reservoir, or find something more affordable, contact us with any questions!
View full product specifications
View warranty coverage
Free shipping within the lower 48 United States