Bilstein

6112 Front Shock and Spring Kit

2007-2014 Chevrolet Tahoe 4WD
$923.00 $965.00
Sale Price

In Stock Estimated Delivery in 3-6 Business Days
Bilstein 47-310858 6112 Shock and Spring Kit
Bilstein 47-310858 Circlip Height Settings 2007-2014 Tahoe
Backordered until Late August due to extreme demand and Bilstein production lag.
Bilstein

6112 Front Shock and Spring Kit

2007-2014 Chevrolet Tahoe 4WD
$923.00 $965.00
Sale Price

In Stock Estimated Delivery in 3-6 Business Days

Found it cheaper? We'll match it.

Price Match Guarantee

We want you to buy from Shock Surplus with confidence. If you find a lower price on the same part number(s) from an authorized dealer, we'll match it.

View our Price Match Policy

Authorized dealer
Free shipping on orders above $250 within the lower 48 United States
Brand new parts with warranty coverage
Free 30-day return and exchange on qualifying orders
Got Questions?
Our experts are here to help!
Part Numbers & Details
Package Contains 2 Front Shocks, 2 Coil Springs, and 2 Coil Spring Seats
Kit includes two front shocks, two coil spring seats, and two coil springs. Coil spring compressor required for installation.
Bilstein Limited Lifetime Warranty
Manufacturer Warranty protects against defects and premature failure.
Designed for 4WD vehicles
This product only works for 4WD vehicles.
Coil-Spring Compressor Required
Strut & spring not assembled, coil-spring compressor required for installation. Front height adjustment is achieved by multiple coil-spring collar settings, lifting the vehicle up to specified height.
Specifications
Part NumberLift/LoweredPositionItemQuantity
47-310858FactoryFrontCoilover1
Product Details

Bilstein's 6112 shock and spring package is designed for the adventure enthusiast wanting more out of their daily-driver or weekend ride. Extremely capable not only off-road, but also dramatically improves on-road handling characteristics and road feedback. The height adjustment of the 6112 kit allows the drive to remain at factory height, or to level out the front end of the vehicle for larger wheel and tire clearance. This Bilstein kit rivals 2.5" race-series shocks and coilovers from the competition, in an easily accessible performance package that can get you almost anywhere off-road.

Compatibility List
YearMakeModelDrivePositionLift
2014ChevroletTahoe4WDFrontFactory
2013ChevroletTahoe4WDFrontFactory
2012ChevroletTahoe4WDFrontFactory
2011ChevroletTahoe4WDFrontFactory
2010ChevroletTahoe4WDFrontFactory
2009ChevroletTahoe4WDFrontFactory
2008ChevroletTahoe4WDFrontFactory
2007ChevroletTahoe4WDFrontFactory

Shock Surplus handles Bilstein's warranty claims; if you encounter a product defect please submit a warranty claim.

View Bilstein Warranty Information

For more information: View the Shock Surplus Warranty Policy.

Shipping Info

Free Shipping on most orders to the lower 48 U.S. states. Truck freight items (over 100 lbs) and custom orders require a separate shipping quote.

  • Applies to items like axles, leaf springs, and long-travel kits.
  • No international shipping on freight items — only to U.S.-based freight forwarders.
  • Worldwide shipping available: Canada, Europe, UAE, Australia, and most of Asia.

Contact us for an international shipping quote.

Returns & Exchanges

30-Day Return Policy — Items must be new, unused, uninstalled, and include all original hardware.

  • No restocking fees for exchanges or gift card credit.
  • 10% restocking fee on refunds, returns cost us real money, so the 10% helps keep the lights on.
  • Installed, damaged, or dirty parts cannot be returned.
  • Any returns missing hardware or miscellaneous items, the return will be denied and returned to the buyer at the buyer's expense.

Need help? Use Live Chat or Email Us anytime.

Start a Return or Exchange

Return Shipping Responsibility

CHECKOUT+ Package and Order Protection plan provides prepaid return labels for any returned packages, this fee varies by product.

  • Our mistake (misboxed, wrong item, damaged): We cover the cost of return shipping.
  • Buyer mistake (wrong item ordered, fitment error, changed mind): Return shipping is the buyer's responsibility - unless CHECKOUT+ Package Protection has been purchased.

  • Under 50 lbs: Discounted carrier rate
  • Over 50 lbs: Discounted carrier rate + $25 oversize fee

Refunds

Refunds are issued within 5–7 business days of receiving your return.

  • Funds typically post to your account in 1–3 business days depending on your payment method.
  • There is a 10% restocking fee on all refunds. We don’t get our original shipping, labor, or transaction fees back — so the 10% restocking fee keeps the lights on.
  • You will receive an email once your refund is processed.

International Orders

  • All international orders are final sale.
  • Returns via freight forwarders only accepted if the product hasn’t left the U.S.
  • Import taxes, duties, and other possible import-related fees are the buyer’s responsibility and not included in our shipping charges.
  • We are not responsible for goods once exported outside the U.S.

Why Shock Surplus

1,000,000+ Shocks Shipped

The Premier Suspension Specialists

Authorized Dealer

Brand New - Warranty Backed

Free Shipping

Orders Over $175 - Lower 48 States

30-Day Returns

Free Exchange on Qualified Orders

INFORMATION

The 2007-2014 Tahoe is the one people keep: paid off, past 150,000 miles, and still hauling the family and the boat. By now the front struts are done. The nose dives at every light and floats over freeway dips. This Bilstein kit fixes that with a 2.6-inch monotube and a 60mm digressive piston, and it lifts the front while it's at it: 1.1" to 2.75", depending on the groove. There's no stock-height setting on the Tahoe; the springs are built to sit it higher.

This is the kit the way Bilstein boxes it. You, or your shop, pick the groove from the chart, set the circlips and put the springs on. Add a matching Bilstein rear in the option above.

What's in the Box

This is the 6112 the way Bilstein ships it: a box of parts that you, or your shop, put together at the height you choose. Here is what comes in it:

  • 2 Bilstein 6112 dampers. 2.6-inch monotube body, 60mm digressive piston, with a row of numbered circlip grooves on the body.
  • 2 Bilstein coil springs. Rated for this kit, not for the factory strut.
  • 2 billet aluminum spring seats and the circlips. The circlip goes in the groove you pick, and the spring seat sits on it.
  • New rod nuts. Bilstein supplies the top flange nut; don't reuse the factory one. Your factory upper mount parts (spring hat, isolator, dust boot, bump stop) go back on, so check their condition before you start.

Setting Your Height

The circlip groove decides your ride height. Here's the order of work:

  • Pick your groove. Find your vehicle's column on the height chart and choose a setting. Bilstein uses the same groove on both sides.
  • Seat the circlips. Snap one into that groove on each damper and make sure it is fully seated all the way around. Bilstein warns that a half-seated circlip will damage the shock.
  • Spring seat, then spring. Drop the spring seat onto the circlip, then the Bilstein spring onto the seat.
  • Compress the spring and fit your factory upper mount. This is the step to respect: a coil spring under load stores a lot of energy. Don't rent anything sketchy. A shop with a mounted, shop-grade strut compressor does each side in minutes, so if you don't own one, take the parts there for this step. Put the factory upper mount parts back in their original positions and torque the new nut to the spec on Bilstein's instruction sheet.
  • Check both sides match before they go in the truck. One groove off from side to side and the front sits crooked.

Want it assembled? We don't list a built-to-height Tahoe pair yet. Call us and we'll quote one at your height, or a suspension shop with a mounted strut compressor can set both sides from the chart while it's on the lift.

All four grooves on Bilstein's sheet are approved on the 2007-2014 Tahoe 4WD V8: #1 1.1", #2 1.65", #3 2.2", #4 2.75". Same groove on both sides. There is no stock setting.

How to choose: Measure from the center of each wheel to the fender lip, front and rear. Front minus rear is your rake. Pick the setting closest to it; on most stock-rear Tahoes that's #1 or #2. Want room for a bigger tire? #3 or #4. Heavy bumper or winch? Go one higher. Not sure? Call us with your numbers: (213) 433-3616.

Matching the Rear: Bilstein 5100 or 5160?

New struts up front and tired shocks out back make the rear wallow over the bumps the front now handles. Add a Bilstein rear in the Rear Shock option.

Bilstein 5100 (24-187237): the default. Factory rear height up to 1" of rear lift (24.33" extended, 15.55" compressed, 8.78" of travel). 46mm digressive piston, zinc-plated monotube.

Bilstein 5160 (25-325072): the reservoir version. Same stock to 1" rear height. The remote reservoir holds more oil, so it runs cooler with a trailer on or on long washboard roads.

Run the 5100 if:

  • The rear is stock or up to 1" higher
  • It's a daily driver or family hauler
  • You want Bilstein at both ends for the least money

Run the 5160 if:

  • You tow a camper or boat most weekends
  • You run long washboard or gravel roads

When you need something else: More than 1" of rear lift needs a longer shock. Call us and we'll size one to your setup: (213) 433-3616.

5100 Rear, 2007-2014 Tahoe 5160 Rear, 2007-2014 Tahoe

On the Road

The nose stays flatter under braking, it leans less on an on-ramp, and a freeway dip gets one motion instead of three. With a trailer on, the front stays calmer when the tongue pushes. It's firmer than a fresh factory strut. If you want soft and floaty, this isn't it.

Off the Road

The 2.6-inch body carries more oil than the factory strut and sheds heat better, so damping holds up on a long gravel road instead of fading. The digressive piston stays firm on small, quick hits and opens up on big ones. Match the rear so the back doesn't become the weak link.

The Honest Trade-Offs

  • You do the spring work. The kit ships as parts. Budget for a shop if you don't own a mounted compressor.
  • No stock setting. The lowest is 1.1". If you want to keep factory height, this isn't the kit.
  • Not for 2WD, Z55 Autoride, the Suburban, or police Tahoes (PPV). See Install Notes.
  • Changing height means doing it again. Moving the circlip means pulling the coilovers and compressing the springs again.
  • Firmer than stock. See "On the Road" above.
  • Don't stack a spacer on top. A strut spacer on top of a 6112 pushes the front past what the factory arms and axles are built for.
  • Watch the alignment at #3 and #4. At 2.2" and up the factory upper control arms run steep. If camber won't come into spec, aftermarket arms fix it.

Install Notes

  • Fits 2007-2014 Chevrolet Tahoe 4WD V8 on passive dampers.
  • Not for 2WD, Z55 Autoride, the Suburban, or police Tahoes (PPV). If your front shocks have a wiring connector, they're electronic. Send us your VIN.
  • Other years: 2015-2020 Tahoes use 47-310834.
  • You need a mounted strut compressor or a shop to put the springs on the dampers. Plan on it before the truck comes apart.
  • Your factory upper mounts go back on. Inspect the rubber; if it is cracked or collapsed, replace the mounts while everything is apart.
  • Removing a strut spacer? Leave it off.
  • Get an alignment right after install. Any lift changes camber and toe.
  • Recheck the front height after the springs settle in over the first few hundred miles.

Who Should Buy These

2007-2014 Tahoe owners keeping it for the long haul who want a real front damper upgrade and a little more height, and either own a mounted spring compressor or have a shop lined up for that step.

CUSTOMER REVIEWS

full star icon full star icon full star icon full star icon full star icon
Bilstein Upgrade
The Bilsteins were purchased to replace some worn Rough Country N3s. The installation was straightforward with no difficulties. I also replaced the steering stabilizer with the matching one from Bilstein. The overall ride improvement feels solid. It is firm but smooth.
Verified Buyer verified check icon
full star icon full star icon full star icon full star icon full star icon
Making the Greatest Truck Even Greater
Put these on my 2014 Tundra. Noticeable difference especially at high speed and washboard gravel. For under $1000, can't go wrong
Verified Buyer verified check icon
full star icon full star icon full star icon full star icon full star icon
Like a new truck.
I didn’t realize how bad my suspension was till I put the Bilsteins on. Had Ranchos and these are sooo much better. Quick shipping. Decent price. Great product.
Verified Buyer verified check icon

The Expert's Opinion

"Bilstein shocks aren't always the softest ride out there, but if you want precision handling, confidence at high speeds, and rock-solid stability under load, they're the best in the game.

They're built to perform. At Shock Surplus, we back every Bilstein we sell – because we know they won't let you down"

Sean
Shock Surplus Founder
15+ years experience
Custom Build
Current ETA from Bilstein is up to 8-12 weeks, often faster.If your needs are time sensitive, please contact us prior to purchasing to get up-to-date assembly and delivery times.
Contact Us

Questions? We've got answers

Product Details

Whether you want to upgrade, add a reservoir, or find something more affordable, contact us with any questions!

Part Numbers & Details

View full product specifications

Close specs
Part Numbers & Details
Package Contains 2 Front Shocks, 2 Coil Springs, and 2 Coil Spring Seats
Kit includes two front shocks, two coil spring seats, and two coil springs. Coil spring compressor required for installation.
Bilstein Limited Lifetime Warranty
Manufacturer Warranty protects against defects and premature failure.
Designed for 4WD vehicles
This product only works for 4WD vehicles.
Coil-Spring Compressor Required
Strut & spring not assembled, coil-spring compressor required for installation. Front height adjustment is achieved by multiple coil-spring collar settings, lifting the vehicle up to specified height.
Specifications
Part NumberLift/LoweredPositionItemQuantity
47-310858FactoryFrontCoilover1
Product Details

Bilstein's 6112 shock and spring package is designed for the adventure enthusiast wanting more out of their daily-driver or weekend ride. Extremely capable not only off-road, but also dramatically improves on-road handling characteristics and road feedback. The height adjustment of the 6112 kit allows the drive to remain at factory height, or to level out the front end of the vehicle for larger wheel and tire clearance. This Bilstein kit rivals 2.5" race-series shocks and coilovers from the competition, in an easily accessible performance package that can get you almost anywhere off-road.

Compatibility List
YearMakeModelDrivePositionLift
2014ChevroletTahoe4WDFrontFactory
2013ChevroletTahoe4WDFrontFactory
2012ChevroletTahoe4WDFrontFactory
2011ChevroletTahoe4WDFrontFactory
2010ChevroletTahoe4WDFrontFactory
2009ChevroletTahoe4WDFrontFactory
2008ChevroletTahoe4WDFrontFactory
2007ChevroletTahoe4WDFrontFactory
Rebate

Check for available product rebates

Close specs
Backordered until Late August due to extreme demand and Bilstein production lag.
Warranty

View warranty coverage

Close specs

Shock Surplus handles Bilstein's warranty claims; if you encounter a product defect please submit a warranty claim.

View Bilstein Warranty Information

For more information: View the Shock Surplus Warranty Policy.

Shipping & Returns

Free shipping within the lower 48 United States

Close specs

Shipping Info

Free Shipping on most orders to the lower 48 U.S. states. Truck freight items (over 100 lbs) and custom orders require a separate shipping quote.

  • Applies to items like axles, leaf springs, and long-travel kits.
  • No international shipping on freight items — only to U.S.-based freight forwarders.
  • Worldwide shipping available: Canada, Europe, UAE, Australia, and most of Asia.

Contact us for an international shipping quote.

Returns & Exchanges

30-Day Return Policy — Items must be new, unused, uninstalled, and include all original hardware.

  • No restocking fees for exchanges or gift card credit.
  • 10% restocking fee on refunds, returns cost us real money, so the 10% helps keep the lights on.
  • Installed, damaged, or dirty parts cannot be returned.
  • Any returns missing hardware or miscellaneous items, the return will be denied and returned to the buyer at the buyer's expense.

Need help? Use Live Chat or Email Us anytime.

Start a Return or Exchange

Return Shipping Responsibility

CHECKOUT+ Package and Order Protection plan provides prepaid return labels for any returned packages, this fee varies by product.

  • Our mistake (misboxed, wrong item, damaged): We cover the cost of return shipping.
  • Buyer mistake (wrong item ordered, fitment error, changed mind): Return shipping is the buyer's responsibility - unless CHECKOUT+ Package Protection has been purchased.

  • Under 50 lbs: Discounted carrier rate
  • Over 50 lbs: Discounted carrier rate + $25 oversize fee

Refunds

Refunds are issued within 5–7 business days of receiving your return.

  • Funds typically post to your account in 1–3 business days depending on your payment method.
  • There is a 10% restocking fee on all refunds. We don’t get our original shipping, labor, or transaction fees back — so the 10% restocking fee keeps the lights on.
  • You will receive an email once your refund is processed.

International Orders

  • All international orders are final sale.
  • Returns via freight forwarders only accepted if the product hasn’t left the U.S.
  • Import taxes, duties, and other possible import-related fees are the buyer’s responsibility and not included in our shipping charges.
  • We are not responsible for goods once exported outside the U.S.