6" Basic System w/Coilover Spacers & Rear Performance Shocks Kit w/6" lift
6" Basic System w/Coilover Spacers & Rear Performance Shocks Kit w/6" lift
| Part Number | Item | Quantity |
|---|---|---|
| K7054 | 6" Basic System w/Coilover Spacers & Rear Performance Shocks | 1 |
Product Description
Fabtech's high quality Tundra lift kit offers increased height to run 33" or 35" tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance.
The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.
The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel.
The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using spacer under the factory air bags for the additional ride height. The rear shocks are replaced with Fabtech Stealth monotube shocks for an enhanced on and offroad ride.
This Tundra lift kit is an affordable suspension upgrade for enthusiasts that desire to run 33" or 35" tall tires with Fabtech quality and strength.
Features
- Arms eliminate the upper ball joint w/ super strong 1" ID Stainless American Uniball
- Chromoly tubing reduces flex found in stock arms for more positive road feel
- 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle
- Retains stock front Coilover shocks for a factory ride
- Perfect system for the daily driver that wants increased clearance to run 33" or 35" tires
- 5 Year 60,000 Mile Powertrain Warranty
Part Numbers
| Qty | Part # | Description |
|---|---|---|
| 1 | FTS26105 | Uniball UCA Kit |
| 1 | FTS26107 | Air Bag Spacer Kit |
| 2 | FTS6188 | Rear Stealth Shock |
| Year | Make | Model | Drive | Position | Lift |
| 2021 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2020 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2019 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2018 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2017 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2016 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2015 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2014 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2013 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2012 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2011 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2010 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2009 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2008 | Toyota | Tundra | RWD, 4WD | 6.0" | |
| 2007 | Toyota | Tundra | RWD, 4WD | 6.0" |
FABTECH LIMITED LIFETIME WARRANTY
Fabtech Motorsports provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials.
The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.
Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under our Limited Lifetime Warranty.
Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powder coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.
Shipping Info
Free Shipping on most orders to the lower 48 U.S. states. Truck freight items (over 100 lbs) and custom orders require a separate shipping quote.
- Applies to items like axles, leaf springs, and long-travel kits.
- No international shipping on freight items — only to U.S.-based freight forwarders.
- Worldwide shipping available: Canada, Europe, UAE, Australia, and most of Asia.
Contact us for an international shipping quote.
Returns & Exchanges
30-Day Return Policy — Items must be new, unused, uninstalled, and include all original hardware.
- No restocking fees for exchanges or gift card credit.
- 10% restocking fee on refunds, returns cost us real money, so the 10% helps keep the lights on.
- Installed, damaged, or dirty parts cannot be returned.
- Any returns missing hardware or miscellaneous items, the return will be denied and returned to the buyer at the buyer's expense.
Return Shipping Responsibility
CHECKOUT+ Package and Order Protection plan provides prepaid return labels for any returned packages, this fee varies by product.
- Our mistake (misboxed, wrong item, damaged): We cover the cost of return shipping.
- Buyer mistake (wrong item ordered, fitment error, changed mind): Return shipping is the buyer's responsibility - unless CHECKOUT+ Package Protection has been purchased.
- Under 50 lbs: Discounted carrier rate
- Over 50 lbs: Discounted carrier rate + $25 oversize fee
Refunds
Refunds are issued within 5–7 business days of receiving your return.
- Funds typically post to your account in 1–3 business days depending on your payment method.
- There is a 10% restocking fee on all refunds. We don’t get our original shipping, labor, or transaction fees back — so the 10% restocking fee keeps the lights on.
- You will receive an email once your refund is processed.
International Orders
- All international orders are final sale.
- Returns via freight forwarders only accepted if the product hasn’t left the U.S.
- Import taxes, duties, and other possible import-related fees are the buyer’s responsibility and not included in our shipping charges.
- We are not responsible for goods once exported outside the U.S.
Product Details
Whether you want to upgrade, add a reservoir, or find something more affordable, contact us with any questions!
View full product specifications
View warranty coverage
Free shipping within the lower 48 United States