King Shocks are one of the premier offroad shock companies, well known globally as having superb everyday ride quality mixed with go-fast attitude and handling. Known for their high speed performance, King Shocks use the highest grade materials every step of the way through the coilover and shock building process. "Nothing rides like a King" is frequently thrown around the industry, which we can agree with.

The build doesn't stop with the coilovers and shocks, there are variations to these dampers which provide assistance with greater weight requirements, lift heights, and other suspension related needs. 

Front Coilovers

25001-119 / EXT / A

There are 3 versions of the front coilovers; all 3 are quite different with their own requirements and considerations. All coilovers come standard with 600lb rates on the Tacoma, but can be upgraded to 650 or 700.

• The standard option is preset at about 2" of lift from King out of the box, with the option to preload the spring for 2.5" of lift without too much affect on the ride quality. Preloading further to 3" will impact ride comfort and overall performance.
• The extended travel version has removed a limiting spacer in the shock to allow for about 0.5" of more down travel, as well as some additional preload if you want to push the shocks to 3.5" of lift. Going to 3-3.5" is technically allowed, but the sweet spot of travel vs comfort and performance is in the 2.5" range.
• The coilovers for the 6" lift systems will not lift your Tacoma 6", but rather they are built to replace the entire shock tower in an existing 6" lift system, whether thats from existing coilovers, or factory struts/springs and a large spacer.

Upper Control Arm Options

All available arms allow for more suspension articulation compared to stock arms on a lifted vehicle, and easier alignment, which is important when lifting the vehicle 3-3.5". 

• SPC Light Racing - 25470
• Icon Vehicle Dynamics Tubular Delta Joint - 58450
  
• Icon Vehicle Dynamics Billet Aluminum Delta Joint - 58550DJ
• Camburg Uniball - 310036
• Camburg Kinetik - 310103
• Camburg X-Joint - 310078
• Old Man Emu - UCA0005
• Bilstein B8 UCA - 51-304683

Rear Shocks

Standard Length Shocks - 25001-121 - good for factory height vehicles, or up to a 1.5" lift using add-a-leaf or blocks.

• Extended Length - 24.29"
• Collapsed Length - 15.58"
• Travel - 8.71"

Extended Length Shocks - 25001-121-EXT - better suited for 2-3" rear lift options like progressive leaf packs, and heavier bumpers/equipment on top.

• Extended Length - 24.54"
• Collapsed Length - 15.83"
• Travel - 8.96"

Rear Lift Options

There are many options to lift the rear of your Tacoma, with their own pros and cons. Traditionally we recommend a progressive add-a-leaf setup that both improves handling and height requirements with additional weight, without negatively affecting ride quality too much. Old Man Emu leaf packs come with the required Fitting Kit (FK29), Ubolts (OMEU53B), and Rear Spring Bushing Kit (OMESB108).

• Eibach Pro-Truck +1.5" Billet Aluminum Lift Block - LB81-82-007-01-02
• Icon Vehicle Dynamics 1.5" Progressive Add-a-Leaf - 51100
• Icon Vehicle Dynamics 2-.5" RXT Leaf System - 51101
• Old Man Emu Dakar 2-2.5" Leaf Pack (0lbs-GVW) - EL111R
• Old Man Emu Dakar 2-2.5" HD Leaf Pack (Constant 500-700lb load) - EL112R
• Deaver F85 1.5" - 3 Leaf Overload Replacement
• Deaver J66 1" Lift - 10 spring Progressive Leaf Pack
• Deaver U402 2" Lift Expedition Series - Stage 1 0-350lb
• Deaver U402 2" Lift Expedition Series - Stage 2 400-600lb
  
• Deaver U402 2" Lift Expedition Series - Stage 3 650-1000lb
  

Rear Bumpstops / Spring Helpers

These options provide additional help to the rear suspension, whether through smoother bump compliance from a loaded rear end (SumoSprings), or through smoother axle performance while offroad and going through rough terrain (Timbren).

• SumoSprings SSR-612-40 - 1400lb
• SumoSprings SSR-612-47 - 1800lb
• SumoSprings SSR-624-40 - 1400lb
• SumoSprings SSR-624-47 - 1800lb
• SumoSprings SSR-627-40 - 1400lb
• SumoSprings SSR-627-47 - 1800lb
• Timbren ABSTTUBPACK
• Timbren ABSTTPACK
• Timbren ABSTRFK
• Timbren ABSTOF
• Timbren ABSOSR

King Shock Warranty

Warranty Issue? Submit a Warranty Request

(King Shocks), reserves the right to change or modify any of the products and their inherent physical and technical specifications without prior notice. King Shocks and affiliates assume no responsibility or liability for any inaccuracies within. Products may not be exactly as displayed; prices and specs are subject to change without notice. Plating, anodizing and other coatings used are warranted to be free from defects at time of sale only. They may degrade over time depending on environmental conditions beyond the control of King Shocks. King Shocks’ products are warranted to be free from manufacturing defects for a period of 90 days from date of purchase. The warranty does not cover; crash damage, abuse, modified and/or use of non- King parts, lack of maintenance or incorrect supplied dimensions and or specifications on custom orders. The user shall determine the suitability of the product for his or her intended use and shall assume all risk and liability in connection therewith.